USER MANUAL
10
2. Output
Go to “Main Menu”→ “Parameter”→ “Display”→ “Output” to enter into the interface shown as
Picture 5-5.
Picture 5-5
3. Private Zone
Go to “Main Menu” → “Parameter” → “Display” → “Private Zone” to enter into the interface
shown as in Picture 5-6.
Privacy Zone is for setting some invisible parts in the selected channel, as shown in Picture
5-6 and Picture 5-7.
1. Select the number of the zone to be set (maximum 4 zones can be set for single channel)
2. Click “Setup” to adjust the position of the zone.
3. After finish setting, right click the mouse to return to the
“Privacy Zone”
page.
4. Click “Save” to save the setting.
Picture 5-6 Picture 5-7
4. Record
Go to
“Main Menu” → “Parameter” → “Record” → “Record” to enter into the interface shown
as Picture 5-8.
Picture 5-8
Video Output:
Live Output
Sequence Mode:
Set sequence mode
SEQ Time:
Sequence time is set 5 seconds
by default. User may set it as required
VGA/HDMI Resolution:
For VGA output or
HDMI output, the optional resolution include
800
×
600, 1024
×
768, 1280
×
1024, 1440
×
900, 1280
×
720, 1920
×
1080
Transparency:
Adjust menu transparency
in the range of 0--128.
Channel:
Set the desired channel in the
drop-down menu
Record Switch:
Enable/disable record
Pre Record:
Enable to pre-record
motion detection or I/O trigger record.
Summary of Contents for qv-3146
Page 1: ...USER MANUAL 1...
