USER MANUAL
22
5.2.4 PTZ and Cloud Storage
1. PTZ
Go to “Main Menu” → “Device” → “PTZ” to enter into the interface shown as Picture 5-37.
Picture 5-37
2. Cloud Storage
Cloud
: Cloud Space (Network HDD). It can upload the DVR periodically captured pictures
and motion detection captured pictures to Dropbox
1) Register in Dropbox website, Address:
https://www.dropbox.com/
2) Configure network to ensure the normal operation of DVR network.
3) Configure Cloud: Enable Cloud and set the channel and interval for DVR periodically captured
pictures; Enable Motion Detection to get captured pictures for motion detection.
4) DriName refers to the name created in the folder of Dropbox and the name can be defined by
the user, e.g. CloudDVR000. The folder is to store the DVR periodically captured pictures)
(See Picture 5-38).
5) Click [Advanced E-mail Setup] to set the Email box. User shall input his Email. (See Picture
5-39)
Picture 5-38 Picture 5-39
Select a PTZ channel and set PTZ
protocol (Pelco-D, Pelco-P), Baudrate (1200,
2400, 4800, 9600), DataBit
（
8, 7, 6, 5
）
, StopBit
(1, 2), Parity (None, Odd, Even Mark Space),
Address and Cruise.
Parameter setting for above channels
must be the same as that of PTZ so that PTZ
can be controlled. The protocol, baudrate and
PTZ address must be set.
Summary of Contents for qv-3146
Page 1: ...USER MANUAL 1...
