BACKUP OPERATING SYSTEM
This refrigerator has a backup operating system. The backup operating system allows the
refrigerator to continue to cool if the temperature sensor of the refrigerator should fail.
If this failure occurs:
• The refrigerator automatically changes to the backup operating system.
• The ON light flashes a fault code. See the “Fault Codes” Section of this manual.
• The backup operating system can over freeze or thaw the contents of the freezer and the fresh
food compartment.
• Make sure the temperatures of the freezer and the fresh food compartment are
satisfactory.
NOTE: If you open the door(s) too often, the temperatures inside the freezer and fresh food
compartment do not become stable. Allow the refrigerator to operate for about one
hour after each adjustment change before you examine the contents. The number
“5” is the coldest temperature setting.
• If the temperature is too warm, push the temperature switch to the right to raise the
temperature setting by one number.
• If the temperature is too cold, push the temperature switch to the left to lower the
temperature setting by one number.
• Have the refrigerator serviced by your dealer or a authorized Service Center as soon as
possible.
Appliances
63
