71
Kiwi Too
The following procedures should be used in securing the spare tire in the travel position:
1. Put the steel hoist lift support located on the end of the cable through the rim of the
tire. Clips need to seat inside of the hole.
Valve stem of the tire MUST be pointed in the down position or away from the
bottom of the travel trailer. Reference Figure 7-1.
The hoist will not seat the tire correctly if the valve stem is toward the bottom of the
travel trailer. Reference Figure 7-2.
Figure 7-1
Figure 7-2
2. Use the crank handle to lift the tire into the travel position. Two crisp breaks must
be heard and felt to insure proper seating of the tire for travel.
The tire must be in contact with the surface to be in the travel position.
WARNING:
DO NOT exceed the maximum load capacities of 100 lbs. for
the hoist. DO NOT use air driven guns or impact wrenches to lift the tire into
travel position.
BBQ GRILL (Option)
An option for your travel trailer is a BBQ Grill. This grill is for use outside of the travel
trailer and comes with a bracket to attach to the side of the unit. The following list will
supply basic operations for the grill. Be sure to read all instructions included with the
grill.
1. Install the grill bracket on the side of the travel trailer mounting bracket. Make sure
that it is securely in place.
2. Place the BBQ grill into the bracket. (Fig. 7-3)
Fig. 7-3
Fig. 7-4
