Jaypro Sports PB-15, Assembly Instructions

JAYPRO SPORTS 

15’ PLAYER’S BENCH, PB-15 

LIST OF MATERIALS 

PIECE # PART 

# DESCRIPTION 

QTY. 

      1   

AR5043 

SEAT PLANK 15’   

    1   

      2   

PB751 

BENCH LEG 

3 

      3   

HN5046 

5/16” FLANGE NUT  

    6 

      4   

EP0018 

2” x 2” END PLUG   

   12 

      5   

HB5030 

5/16”-18 x 3” CARRIAGE BOLT     

    6 

      6   

AR5044 

HOLD DOWN CLIP  

    6 

      7   

AR5045 

END CAP 

    2 

      8   

HS5035 

#8 PAN HEAD SCREW x ½” 

    4 

ASSEMBLY INSTRUCTIONS 

TOOLS REQUIRED: PHILLIPS SCREWDRIVER BIT W/ ELECTRIC DRILL (1), 
 

            ½” SOCKET WRENCH OR ADJUSTABLE WRENCH (1) 

 
 
 
1)  SLIP THE END CAPS (7) SNUGLY ONTO EACH END OF THE PLANK (1). 

USING THE ELECTRIC DRILL, ASSEMBLE A SELF-DRILLING SCREW (8)  
THROUGH THE CAP AND INTO THE FLANGE OF THE PLANK.  TWO 
SCREWS ARE REQUIRED PER END CAP. 

 
2)  FOR EASIEST ASSEMBLY, POSITION SEAT PLANK (1) ON A LEVEL 

RAISED SURFACE SUCH AS A DESK TOP, BLEACHER SEAT OR WORK 
BENCH.  PLACE THE CARRIAGE BOLT (5) AND BOLT CLIPS (6) 
APPROXIMATELY INTO PLACE WITHIN THE SLOTS OF THE PLANK.  
NOTE THAT THE LEGS SHOULD BE NO MORE THAN 8” FROM THE 
PLANK EDGE. 

 
3)  POSITION THE LEGS AS SHOWN AND LOOSELY ASSEMBLE THE 

HARDWARE ILLUSTRATED IN DETAIL ‘A-A’.  DO NOT FULLY TIGHTEN 
THE HARDWARE AT THIS TIME.  LEVEL THE BENCH AND MAKE SURE 
THE LEGS ARE ADEQUATELY SPACED APART.  TIGHTEN ALL 
FASTENERS FULLY.