DATE:
DRAWN BY:
5/23/2018
MODEL NUMBER:
CHECKED BY:
PRODUCT NAME:
BSA
TC-710 WIRING DIAGRAM
WVB
REV:
SHEET:
1 OF 2
x.x = + 0.1
x.xx = + 0.01
x.xxx = + 0.005
X
X
= + 1/16"
X = + 1/16"
TOLERANCES:
PROJECTION METHOD:
THIS DRAWING IS THE SOLE PROPERTY OF JAYPRO
SPORTS INC. AND MAY NOT BE REPRODUCED
WITHOUT WRITTEN PERMISSION OR CONSENT
UNLESS OTHERWISE SPECIFIED
NOTES:
1.
ALL WIRING SUPPLIED BY ELECTRICAL CONTRACTOR. WIRING TO BE IN ACCORDANCE WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES.
2.
MOTOR UP/DOWN ROTATION ARE DEPENDANT ON BOTH THE LOCATION OF THE MOTOR AND THE ORIENTATION OF THE ROLL. THEREFORE, IT CANNOT BE
PREDETERMINED WHICH DIRECTION THE RED AND BLACK WIRE CORRELATE TO. TEST THE DIRECTION OF THE MOTOR WITH CAUTION BY ONLY OPERATING THE MOTOR
FOR SHORT DURATIONS. IF THE DIRECTION IS OPPOSITE TO THE DESIRED DIRECTION, SWITCH THE BLACK AND RED WIRES.
3.
REFER TO THE TC-710 INSTALLATION MANUAL FOR INFORMATION REGARDING SETTING THE UP/DOWN LIMITS.
4.
KEY SWITCH FITS WITHIN A 3" X 2-1/4" X 2-1/2" (H X W X D) ELECTRICAL BOX, SUPPLIED BY OTHERS.
5.
CONTACT JAYPRO SPORTS AT 800-243-0533 WITH ANY QUESTIONS PRIOR TO WIRING. INCORRECT WIRING COULD DAMAGE THE MOTOR OR CURTAIN SYSTEM.
TC-710 WITH SINGLE MOTOR
ELECTRICAL SPECIFICATIONS:
INPUT: 120 VAC +/- 10% 50/60 HZ
OUTPUT: 120 VAC 10A
SIZE WIRE ACCORDING TO RUN LENGTH AND LOCAL CODE
TC-710, SINGLE MOTOR
BLACK
RED
KEY
SWITCH
(KS-13)
MOTOR
G
R
E
E
N
W
H
IT
E
B
LA
C
K
FROM 120V
POWER SUPPLY
