background image

TC-710 -  INSTALLATION AND MAINTENANCE MANUAL

TC-710

www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA

SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING

 COPYRIGHT 2018 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED

Rev D, Sheet 2 of 9

INNOVATION, PERFORMANCE AND COMMITMENT SINCE 1953

IMPORTANT NOTES & INFORMATION:
 
1.  Due to the nature of the product, the architect or structural engineer must verify structural adequacy.  Jaypro is not 
responsible for the structure.  Before each use, check equipment for proper connecting hardware and structural integrity.
Replace damaged or missing hardware immediately.  
 
2.  Follow all warning signs and labels on equipment.
 
3.  Inspect all equipment before each use.
 
4.  Only licensed electricians are permitted to provide power to the key switch, and to and from the winch.  Authorized 
installation personnel may provide temporary wiring only for the purpose of testing the equipment during installation.
 
5.  Make sure there are no obstructions above or below the curtain when operating the unit.
 
6.  Facility personnel should never access the internal components of the winch.
 
7.  Do not leave the key in the wall switch.  Only authorized trained personnel should have access to the keys.  Students 
are NOT authorized to operate the equipment.
 
8.  Always require that all personnel follow all safety procedures any time the equipment is in operation.
 
9.  Key switch must be located within clear eyesight of the equipment.  Never operate the equipment when sightline is 
obstructed.  Post additional personnel around the equipment as needed to keep children and other unauthorized 
personnel clear from the operated equipment.
 
10.  Should equipment become damaged or stop working, immediately stop using the system and tape off the area 
around the curtain.  Do not continue using until a qualified service technician has inspected the equipment and certified 
the system is safe to resume operating.
 
11.  Use of the equipment other than intended, may be hazardous or cause damage to the equipment.  Alterations or 
modifications of this equipment may be hazardous and result in injury.  For repair or replacement, contact your dealer or 
Jaypro Sports.
 
12.  This unit is equipped with automatic limit switches.  These are designed to stop the divider when it is completely raised
or lowered.  The "UP" limit switch should be considered as a safety switch.  DO NOT rely on this to stop the unit.  When the 
divider is high enough, release the switch.  The limit switches are mechanical devices, failure is possible.
 
13.  The "LOWER" limit will stop the divider when the unit is fully lowered.  It is acceptable to let the lower limit stop the 
curtain when lowering.
 
14.  Over the course of time, anchors and bolts/nuts may loosen as a result of vibration during equipment use.  Periodic 
inspection and rework is strongly advised to tighten hardware and return equipment to the original level of safety.
 
15.  Preventive maintenance should be performed annually to ensure years of safe, trouble-free use.  This work must be 
completed by a qualified installer or technician.  If one is not available to you, Jaypro's own field service team can be 
hired to do the work.  See Appendix A for standard equipment maintenance instructions.

TABLE OF CONTENTS:
 
I.

IMPORTANT NOTES & INFORMATION

II.

GENERAL INSTALLATION PROCEDURE

III.

APPENDIX A - GENERAL MAINTENANCE INSTRUCTIONS

IV. APPENDIX B - WIRING DIAGRAM
V.

APPENDIX C - SETTING THE LIMITS

VI. APPENDIX D - INSTALLATION RECORD

PAGE

 

2
3
7
8
9

10

Summary of Contents for TC-710












Reviews: