TC-710 - INSTALLATION AND MAINTENANCE MANUAL
TC-710
www.jaypro.com / (800) 243-0533 / 976 Hartford Tpke, Waterford, CT 06385 USA
SUBJECT TO CHANGES IN DESIGN AND MANUFACTURING
COPYRIGHT 2018 JAYPRO SPORTS, LLC. ALL RIGHTS RESERVED
Rev D, Sheet 3 of 9
INNOVATION, PERFORMANCE AND COMMITMENT SINCE 1953
GENERAL INSTALLATION INSTRUCTIONS:
*** IMPORTANT NOTE ***
Read complete installation manual before starting any work.
1. Refer to supplied installation drawings. Confirm all dimensions and consult with
general contractor and/or clerks of the works to verify equipment location.
2. Install support structure and roller cradle assemblies. The support stucture is specific
to the type of building and the general location of the curtain. The figures in this
manual may differ from the actual curtain supplied. Refer to Figure 1.
*** IMPORTANT NOTE ***
Proper installation of a Mini Top Roll Curtain requires that the roller cradles be perfectly
in line with each other and at the exact same elevation. Roller cradles that are not at
the same elevation can cause the fabric to "walk" on the drive pipe and bunch up,
which can damage the fabric and/or curtain system.
3. Secure each roller cradle in the "OPEN" position to allow the drive pipe to be
installed into the cradles. Refer to Figure 2.
FIGURE 1: INSTALL SUPPORT STRUCTURE AND ROLLER CRADLE ASSEMBLIES
FIGURE 2: SECURE ALL ROLLER CRADLES IN "OPEN" POSITION
BUILDING STRUCTURE (VARIES PER JOB)
WOOD TRUSSES SHOWN
ROLLER CRADLE SUPPORT STRUCTURE
ROLLER CRADLES
ENSURE ALL ROLLER CRADLES ARE
IN LINE AND LEVEL WITH EACH OTHER
TEMPORARILY INSTALL
HARDWARE TO OPEN
ROLLER CRADLES
ROLLER CRADLE
SHOWN IN "OPEN"
POSITION
