Jazz Speakers J-9941B, Operating Instructions Manual

Product Specifications

1. Subwoofer 

 :

Output Power (R.M.S.) :

 50 W

Driver :

  8" Woofer 

Load Impedance :

 4 Ohms

Fuse: 

AC 250V/1A (Local voltage: 220 ~ 240V)

               AC 125V/1.5A (Local voltage: 100 ~ 120V)  
    

Magnetically Shield :

2.

Satellite

 :

Output Power (R.M.S.)

:

 10W x 5 

Driver : 

Front & Rear SPK. (Plastic) 3" full range 

                 Center SPK. (Plastic) 3" full range + 1.5" dome tweeter
    

Load Impedance :

 4 Ohms  

Magnetically Shield :

 YES 

3.

Total Power (R.M.S.) :

 100 W

4.

Frequency Response :

 40 Hz ~ 20 kHz

5.

Dimension (W x H x D) :

 Subwoofer - 280 x 420 x 350 mm

                                             Center - 330 x 95 x 200 mm
                                             Front & Rear - 100 x 150 x 150 mm

6. Center Speaker (With build in Decoder) : 
    POWER Adapter :

 Power source from DC adapter       

Operation Environment :

 0

 ~ 40

7. Remote control :
    Battery :

 (DC 1.5V  AAA  x 2)

Dimension (W x H x D) :

 W 60 x H 15 x D 160 mm

(Wooden)

(Plastic)

Not necessary  

3

4

Remote Control Functions

12. POWER

17. VOLUME (+/-)

3. 5.1 CH

2. Pro Logic

1. Stereo

13. Mute

5. Line

4. Optical

14. Coaxical 

7. C_delay

6. S_delay

15. Dynamic

9. SPCFG

8. Mode

16. Status

11. Test

10. Trim

18.

Theater

Hall

Stadium

1. Stereo :

 Manual selection of stereo 2-channel audio mode.

2. Pro Logic :

 Manual selection of Dolby Pro Logic audio mode.

3. 5.1 Ch :

 Manual selection of Dolby Digital or DTS audio mode.

4. Optical :

 Manual selection of optical input mode.

5. Line :

 Manual selection of line input mode.

6. S_Delay :

 Surround speaker's audio delay when in the Dolby Digital or Dolby Pro

  Logic audio modes. Choices are

: 0 ms, 5 ms, 10 ms, 15 ms (default

: 0 ms).

7. C_Delay :

 Center speaker audio delay when in the Dolby Digital or Dolby Pro

  Logic audio modes. 0-5 ms delay (default : 0 ms)

8. Mode :

 Selection of audio type. Choices are DTS(*), Dolby Digital, Dolby Pro Logic, 

    or Stereo

9. SPCFG :

 For Dolby Digital and Dolby Pro Logic audio modes only. Distributes

    low-bass frequencies, usually reproduced by the subwoofer, to the front, center
    and surround speakers. Press the SPCFG button and adjust the levels using the
    /- buttons.

10. Trim :

 Same as "Test" but uses your audio input signal rather than a test signal.

    Adjust each speaker's volume level using the /- buttons.

11. Test :

 Auto test individual speaker volume adjustment when in Dolby Digital or

   Dolby Pro Logic modes. Press and hold the test button for 2 seconds. As the test

   signal travels from channel-to-channel, adjust each speakers volume level using

   the /- buttons.

12. Power :

 Turns system suand-by power on/off.

13. Mute :

 Mutes/Restores systems volume.

14. Coaxial :

 Manual selection of coaxial input mode.

15. Dynamic :

 Dynamic range adjustment between the loudest and softest sounds

being reproduced. Choices are

: 0%, 25%, 50%, 75% (default

: 0%).

16. Status :

 Displays audio mode status.

17. Volume (+/-) :

 Raises or lowers the systems volume level.

18. Theater /Hall /Stadium :

 Used in only the Stereo audio mode, selecting Theater,

Hall, or Stadium modes creates various levels of simulated surround sound

 effects

from a 2-channel stereo audio source. 

Package Contents

* Center Speaker with built-in AC-3 Decoder Box , Subwoofer, Satellite speakers x 4 
* Power Adapter                                                                                                    
* Coaxial Cable  
* 3.5 mm to RCA stereo signal cable x 1
* RCA to RCA signal cable(3M) x 1
* RCA Extension cable(3M) x 4
* 9 pin DIN cable x 1
* Wall Mounting kit
* Remote control  
* Battery (DC 1.5V AAA x 2) 
* User Manual 

Optional Accessories

* F-500(A) Speaker stand

Telescopic floor stand for rear speaker (Cast metal base)