2
3
JB INDUSTRIES
• DS-20000S Operating Manual • 630.851.9444 • sales@jbind.com
JB INDUSTRIES
• DS-20000S Operating Manual • 630.851.9444 • sales@jbind.com
CONNECTING SMART DEVICE TO WIRELESS SCALE
1. Begin with DS-20000S off.
2. Power on smart device and enable Bluetooth settings. Bluetooth must be on to continue.
3. Power on the DS-20000S; green LED will display and Wireless Connectivity LED will flash yellow and begin
broadcasting. DO NOT PRESS Wireless Connectivity Button, scale will pair automatically. If you press the
Wireless Connectivity Button in error, refer to Troubleshooting section.
SPECIFICATIONS
Capacity
250lb
(115kg)
Usage
Indoor/outdoor
Operating Temperature
+32°F to 122°F (0°C to +50°C)
Storage Temperature
+14°F to 140°F (-10°C to +60°C)
Humidity
85% RH @113°F (45°C), non-condensing
Power Supply
Four AA batteries
Battery Life
Approximately 80 hours
Accuracy
± 0.06% of reading ± 10g (0.25oz)
Bluetooth
®
Range
30ft (10m); Altitude 6500ft (2000m)
Weight
9lbs
(3.6kg)
Warranty
2
years
FEATURES
Wireless connection to smart devices
via DS-20000S app
Oversized, slip-resistant platform
User defined, programmable weight
and approaching alarms
Job time recording and email accessible
data logging
Adjustable units of measurement
Auto shutoff
LED connectivity and power lights
Water-resistant design
Rugged carrying case
OPERATING INSTRUCTIONS
System Requirements
• Apple
®
iPhone 4s (or higher), iPad 3 (or higher) or Android™ 4.3 (or higher)
• Download and install the free JB DS-20000S app
Install Batteries
Remove battery cover with a Phillips head screwdriver. Insert four AA batteries.
Power Settings
To power on, press the POWER button. The green LED will light.
To power off, press and hold the POWER button until unit powers down.
Note: DS-20000S will shutoff automatically when Bluetooth connection is absent for five minutes. Once
paired, auto shutoff will occur after 15 minutes of inactivity.
Bluetooth
On
4. Open the DS-20000S app on
smart device.
5.
For iPhone:
Select the “JB”
icon at the upper left of the
screen and select “Scan” to
search for compatible devices.
Select “Scale”.
For Android:
Select the
Bluetooth icon at the upper
right of the screen to search
for compatible devices. Select
“Scale”.
6. Once paired with device the
flashing yellow Wireless
Connectivity LED will turn off
and startup screen will display.
iPhone App Display
Android App Display
TROUBLESHOOTING
If DS-20000S has trouble pairing, does not display “Scan” to search, or disconnects from smart device:
1. Press and hold Wireless Connectivity Button for five seconds until Power LED flashes green. If it does not
flash green and the Wireless Connectivity LED flashes yellow, press and hold Wireless Connectivity LED
Button again for five seconds until Power LED flashes green.
2. Scale will now pair with your device.
Power Button
Yellow LED
JB INDUSTRIES
Green LED
Wireless
Connectivity Button
