ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
7/50
PLANO SPOT
Sound Mode
Used to choose the desired sound mode to trigger the shows.
Press the MENU button until
is shown on the display.
Press the ENTER button to select.
Use DOWN and UP button to select one of the available modes:
(sound mode ON)
the shows are triggered by the internal microphone.
(sound mode OFF)
the shows are triggered by the speed selected with the shows.
Once the right mode is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to return to running mode.
Color Preset Mode
Used to choose one of the 16 standard preset colors. You can also define your own custom color,
based on individual settings for red, green and blue.
Press the MENU button until
is shown on the display.
Press the ENTER button to select.
Use DOWN and UP button to select one of the available options:
Select one of the preset colors
to
and press ENTER to confirm.
Select
to make your own color and press ENTER to confirm. Now you can set the 3 colors to
make your own custom color:
(red)
:
use the DOWN and UP buttons to set the value between 000 and 255. Confirm with
the ENTER button. Use the DOWN and UP buttons to select the next color.
(green)
:
use the DOWN and UP buttons to set the value between 000 and 255. Confirm
with the ENTER button. Use the DOWN and UP buttons to select the next color.
(blue)
:
use the DOWN and UP buttons to set the value between 000 and 255. Confirm with
the ENTER button. Use the DOWN and UP buttons to select the next color.
Once the right color press the
MENU
button for about 2 seconds to return to running mode.
Slave Mode
By choosing the right slave mode you can improve the impact of the multi-channel shows.
The first slave should be in “SL 2” mode, the second in “SL 3” mode, etc. until “SL16”.
Press the MENU button until
is shown on the display.
Press the ENTER button to select.
Use DOWN and UP button to select one of the available slave modes.
Once the right mode is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to return to running mode.
Blackout Mode
Blackout mode: when no DMX-signal is detected, the unit goes in blackout.
No blackout mode: when no DMX-signal is detected, the unit automatically switches to master mode.
ALWAYS set to “No Blackout” when the unit is used in standalone or master (master/slave) mode!!!
Press the MENU button until
is shown on the display.
Press the ENTER button.
Use DOWN and UP button to select
Y E S
(blackout) or
n o
(no blackout) mode.
Once the mode is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to return to running mode.
Led Display
Display on: display is always on.
Display off: display is off when not used.
Press the MENU button until the display shows
.
Press the ENTER button.
Use DOWN and UP buttons to select
(display always on) or
(display off when not used).
Once the mode is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to return to running mode.
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
8/50
PLANO SPOT
Display Inversion
Display normal: display is readable when the unit is on the floor.
Display inversion: display is readable when the unit is mounted upside down.
Press the MENU button until the display shows
Press the ENTER button, the display starts blinking.
Use DOWN and UP buttons to select
(display inversion) or
(normal display).
Once the mode is selected, press the ENTER button to confirm.
Press the
MENU
button for about 2 seconds to return to running mode.
Fixture Hours
Used to show the number of working hours of the unit.
Press the MENU button until
is shown on the display.
Press the ENTER button to show the number of working hours in the display.
Press the
MENU
button for about 2 seconds to return to running mode.
Software version:
Used to show the software version of the unit.
Press the MENU button until
is shown on the display.
Press the ENTER button to show the software version of the unit.
Press the
MENU
button for about 2 seconds to return to running mode.
OPERATING INSTRUCTIONS
A. Standalone 1unit:
Just connect the projector to the mains and put on some music. The unit starts working automatically
to the rhythm of the music.
Refer to chapter HOW TO SETUP to learn how to switch between static and sound mode.
Remark:
You can connect a CA-8 remote controller to the unit if you want to have more control.
B. Two or more units in master/slave setup:
Connect 2 to maximum 16 units together. Refer to the chapter “electrical installation” to learn how to
do this.
Connect all units to the mains and put on some music. The units will start working automatically to the
rhythm of the music and show the internal chase programs. Refer to chapter HOW TO SETUP for
more information.
Remark:
You can connect a CA-8 or LEDCON-02 remote controller to the master unit if you want to
have more control over the master/slave operation.
C. Connect the optional CA-8 controller for more control:
The CA-8 controller can only be used in standalone or master/slave mode. Connect the controller to the
CA-8 input of the first unit (master). Now you can control all the connected units:
BUTTON
ACTIONS
STANDBY
To blackout all the fixtures
FUNCTION
1.Synchronous strobe
in white color
2.The same color
chase
3.Different color
strobe
Select one of the
16 different colors
or custom color.
Select one of the 12
different multi-channel
shows.
Select one of the
16 different color
chases or color
fade mode.
MODE
Strobe
(LED OFF)
Color select
(LED ON)
Show select
(LED slow blinking)
Chase select
(LED fast blinking)
