JBC reserves the right to make technical changes without
prior notification.
ENGLISH
3
Sleep temperature
.
It allows you to modify temperature in sleep
mode. At higher temperature there is more tip
tinning oxidation and less tip life.
Through experience we’ve learned that a
difference of approximately 100°C or 200°F
between sleep- and work temperature is ideal.
Temperature adjust
.
It is used to make an adjustment in the
temperature of the tool.
Top scale boost
.
Temperature tool increase
at the top end of the scale. (Only for analogical
stations till 400ºC or 750ºF).
This function allows us to increase in a maximum
of 50ºC or 100º F the temperature of the tool when
the dial is placed at the top end of the scale.
COUNTERS READ
It controls the control unit counters.
Total hours
.
Total of hours that the control unit has been
working.
Sleep cycles
.
Number of times that the iron has entered into the
stand.
Sleep hours
.
Hours in sleep mode.
Iron changes
.
Number of times that a cartridge or handpiece
has been replaced.
RESET PARAMETERS
This function allows to come back to the original
parameters.
