This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
www.jbctools.com
00
20
48
5-
01
21
Specifications
AL-1A
120V 50/60Hz. Input fuse: 2A. Output: 23.5V
AL-2A
230V 50/60Hz. Input fuse: 1A. Output: 23.5V
AL-9A
100V 50/60Hz. Input fuse: 2A. Output: 23.5V
- Temperature Range:
90 - 450 °C / 190 - 840 °F
- Output Peak Power:
130W
- Tip to ground resistance:
<2 ohms
- Tip to ground voltage:
<2mV RMS
- Ambient operating temp:
10 - 50 ºC / 50 - 122 ºF
- Diameter of solder wire:
0,4 - 1,8 mm / 0.02 - 0.07 in
- Capacity of solder reels:
up to 2 Kg / 4.41 lb
- Wire length:
1 - 60 mm / 0.04 - 2.36 in
- Programmable dispensing speed range: 5 - 300 units (0.5 - 30 mm/sec. / 0.02 - 1.18 in/sec.)
- Control Unit Dimensions / Weight:
235 x 170 x 112 mm / 9.25 x 6.69 x 4.41 in
(L x W x H)
5,8 Kg / 12.9 lb
- Total Package Dimensions / Weight:
368 x 368 x 195 mm / 6.7 Kg
(L x W x H)
14.49 x 14.49 x 7.68 in / 14,8 lb
Complies with CE standards.
ESD protected.
