AP250
AL250
AL250
SF280
SF250
ALE250
AL250
LOADING
SOLDER WIRE
4
1
2
Connect the tool to the station and switch the station on. With the tool out of the stand, press the
WIRE LOAD (1) key at the station till the solder wire comes out at the guide tube end (2).
Fast Wire Dragging
Adjust the dragging strength (1) to enable the solder wire to be passed on properly and to
avoid any jamming or clogging.
Fix the dragging mechanism by tighten more or less (2) the sprung element.
Clutch Regulation
1
2
Solder Wire Loading
-
-
+
+
+
+
-
-
