Quick Access to Feeder Setting Modes
The solder wire dispensing values can be directly set up from the work screen.
Press or to change the tool temperature value.
When the main screen is displayed, by pressing button speed and length value can be set up.
The following parameters can be changed according to the different dispensing modes:
- Contiunous Mode: Speed
- Discontinuous Mode: Speed and length
- Program Mode: 3 feeding parameter pairs (length and speed) for every program.
Note:
First select the program to be modified at the work screen by using and to switch
between the programs.
Program number #
Program Mode
Control Process
9
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm
