jbc AM 6500, Instruction Manual

16

AD 8210

soldering iron stand

Ref.0788210

2210/2225 

handpiece Ref. 2210000

2245 

handpiece

Ref. 2245000

2245 

cartridges

2210

 cartridges

Connector

ADVANCED HANDPIECES RANGE

All the Advanced soldering handpieces range
can be connected to the 

AM 6500

 station.

The 

AM 6500 

station includes the following

products:
-

2245 

handpiece

ref. 2245000 with the 

2245-

003 

cartridge Ref. 2245003. Power: 50W. For

general soldering work.

-

AD 8245 

soldering iron stand

ref. 0788245.

- Set of accessories ref. 0780593 with 

2245-007

cartridge

Ref. 2245007. It can be chosen from

a wide range of different 

2245 

cartridges to

adapt perfectly to the needs of the job (pag.
24).

The following soldering handpiece can be
connected to the 

AM 6500

 station:

-

2210/2225 

handpiece ref. 2210000. Power:

20W. For high precision work, SMD etc.
Available 

2210

 cartridges: see page 26.

The 

2210/2225 

handpiece has to be connected

to the 

AD 8210

 stand which has been especially

designed for this handpiece.

One version of soldering iron handpiece
covered with a heat insulator is available:
-

2245

 Confort handpiece ref. 2245110.

These articles are not delivered with the station.
The 

2210

 and 

2245 

handpieces and cartridges

comply with the MIL-SPEC-2000 referring to
the potential difference between the soldering
tip and ground connection, must be less than 2
mV.
For a soldering handpiece to work properly,
the following components are required: a control
unit, a handpiece and the corresponding stand
and cartridge.
The soldering iron is connected to the station in
the following way:
The cable connection of the soldering iron is
connected to the plug in the soldering iron stand
and the cable connection of the soldering iron
stand can be connected to any of the two
connectors at the back of the station. Please
find the connection plan on figure.

AD 8245

soldering iron stand

Ref.0788245