Replacing Brass Wool
1. Lifting
2. Replacing
3. Reassembling
4. Pressing on
Lift the wiper by using the recess on the edge.
Remove the wiper and replace the brass wool
with a new one.
Assemble the new wiper onto the charging base.
Make sure that the brass wool is on the far left
and that there is space for the wiper on the right.
Press the wiper down at the 4 corners until
you feel it click into place. Make sure that the
wiper membrane is inserted correctly all the
way around.
Note:
The brass wool and the wiper positions can be reversed by rotating the antisplash membrane
180 degrees.
Wiper rotated
180 degrees
16
