Parameter
Tool ID
Lock parameters
Sleep Mode /
Sleep temperature
Hibernation delay
Minimum
temperature
Maximum
temperature
Tool status
Temperature units
Description
Allows to modify the tool identifier.
Allows to lock the parameters of the station using a four-digit code. The
default code is 0105, but a new code can be set by simply entering some
other four digits of choice when locking the parameters.
Set Sleep Mode on/off. The tip temperature will drop only to the selected
Sleep temperature when placed on the tool holder.
Set Hibernation delay from 5 to 15 sec. The countdown starts when the
tool remains inactive (no movement).
Select the minimum temperature that can be set for the Work Mode.
Select the maximum temperature that can be set for the Work Mode.
The different colors and light modes of the status indicator light mean the
following:
- Green: working / soldering
- Green blinking: charging
- Alternating red/green blinking: low battery, less than 20%
- Red blinking: no cartridge
- Blue blinkin: safety cap on and tool disconnected from the station
- No color: power off
Allows to change the units of temperature measurement between Celsius
degrees and Farenheit degrees.
Settings
20
