Improve thermal transfer by cleaning the tip after each solder joint.
Features
Packing list
Brass wool
Ref. CL6210
Splashguard
Ref. 0017576
Non-slip base
Sponge
Ref. S0354
ESD Tip Wiper
Ref. CL0240
Very effective cleaning
method. It leaves a small
layer of solder on the tip to
prevent oxidation between
cleaning and rewetting.
It prevents splashing of
solder particles when
using the brass wool.
No need to hold the
base while cleaning tips.
The least harmful
cleaning method. Keep
the sponge damp with
distilled water when
working to avoid tip wear.
A temperature resistant
receptacle lets the
operator remove
excess solder by gentle
tapping or wiping.
Tapping:
Wiping:
Tap to remove
excess solder.
Use the slots to remove
remaining particles.
Sponge
............................ 1 unit
Ref. S0354
Brass Wool
..................... 1 unit
Ref. CL6210
ESD Tip Cleaner
........... 1 unit
Ref. CL8499
Manual
............................ 1 unit
Ref. 0018806
ESD Tip Cleaner
Ref. CL8499
The following items should be included:
Antisplash
Membrane
Ref. 0017574
Prevents splashing
to maintain the
work area clean.
2
www.jbctools.com
