A
B
C360-001
C360-003
C360-007
C360-002
C360-004
C360-006
OK
A
B
C360-001
C360-003
C360-007
C360-002
C360-004
C360-006
OK
$¡
%¡
Changing the Tip
Tip’s fasten area.
Do not hold it on the spring clamp.
To remove the tip, use a pair of fl at-nosed
pliers, twist the tip and pull.
Important:
This operation should be done while the tip is hot and at a minimum temperature of
250°C, so that any tin left inside is still molten.
!
C360-001
Ø A = 1 mm ( 0.039 in )
Ø B = 0.8 mm ( 0.031 in )
Ø max. pin = 0.4 mm ( 0.016 in )
C360-002
Ø A = 1.2 mm ( 0.047 in )
Ø B = 0.8 mm ( 0.031 in )
Ø max. pin = 0.6 mm ( 0.024 in )
C360-004
Ø A = 1.4 mm ( 0.055 in )
Ø B = 1 mm ( 0.039 in )
Ø max. pin = 0.8 mm ( 0.031 in )
C360-007
Ø A = 1.9 mm ( 0.075 in )
Ø B = 1.4 mm ( 0.055 in )
Ø max. pin = 1.2 mm ( 0.047 in )
C360-006
Ø A = 3 mm ( 0.118 in )
Ø B= 1.5 mm ( 0.059 in )
Ø max. pin = 1.3 mm ( 0.051 in )
C360-003
Ø A = 1.4 mm ( 0.055 in )
Ø B = 1 mm ( 0.039 in )
Ø max. pin = 0.8 mm ( 0.031 in )
Compatible Tips
The
DS360
uses
C360
tips.
Find the model that best suits your needs in
www.jbctools.com
www.jbctools.com
7
