Peripherals
Port 2-PA
17:14
Pedal
PD_a
Module
MSE
Pedal
PD_a
PD_b
None
Peripherals
Port 2-PA
17:14
Pedal
PD_a
Module
MSE
Peripherals
Port 2-PA
17:14
Pedal
PD_a
Function
Extractor
Mode
released
Minimum time
0 sec
Back
Peripherals
Port 2-DR
17:14
Pedal
None
Module
None
Module
MSE_a
None
Pedal Initial Set up
(Ref. P-005)*
1.
Enter the
Peripherals
Menu
and
select the
port
which you want to join to the pedal.
2.
Select the pedal from the list (
Note that your
first connection is denoted as “a”, the second
being “b”, etc. (e.g. PD_a, PD_b,...)
.
3.
Set the pedal function according to your work needs:
Select how the pedal
acts: as
Sleep
,
Extractor
(hibernation)
or as a
module
switch.
Select the activating
mode of the pedal
(
pressed
/
released
)
Set the duration
of the activation
time when pressing
the pedal once**.
For continuous
functioning keep the
pedal pressed.
**NB: The same can be applied inversely when continually pressing the pedal and releasing to activate.
* These references are not included
1.
After connecting the module, enter the
Peripherals Menu and select the port which
you want to join with the module.
2.
Select the module from the list of peripheral
connections. Remember your first connection
is denoted as “a”, the second being “b”, etc.
(e.g. MS_a, MS_b,...).
3.
Press Menu or Back to save changes.
MSE/MVE Initial Set up
(Ref. MSE-A / Ref. MVE-A)
*
6
