jbc DSS, Instruction Manual

Safety

- Do not use the stand for any other purpose than soldering or rework. 

- The power cord must be plugged into approved bases. Be sure that it is properly grounded
  before use. When unplugging it, hold the plug, not the wire.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.
  The soldering tip, the metal part of the tool and the stand may still be hot even when the station
  is turned off. Handle with care, including when adjusting the stand position.

- Avoid the contact of flux with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
  working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced
  physical, sensory or mental capabilities or lack of experience provided that they have been given
  adequate supervision or instruction concerning use of the appliance and understand the hazards
  involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

  It is imperative to follow safety guidelines to prevent electric  
  shock, injury, fire or explosion. 

w w w.jbctools.com

9