SO53 3LE
Customer Helpline
0845 600 5526
SO53 3LE
Customer Helpline
0845 600 5526
SO53 3LE
Customer Helpline
0845 600 5526
SO53 3LE
Customer Helpline
0845 600 5526
4. auXiliary HanDle
Slide the handle onto the drill
and rotate to the desired working
position. To clamp the auxiliary
handle rotate the handgrip
clockwise. To loosen the auxiliary
handle, rotate the hand grip anti-
clockwise. Always use the auxiliary
handle (See
3
).
5. DePtH stOP
Fit the drill bit or driver bit into the
chuck. Loosen the depth stop
by rotating the handle grip anti-
clockwise. Slide the depth stop until
the distance between the depth
stop end and the drill/driver bit end
is equal to the depth of hole/screw
you wish to make. Then clamp the
depth stop by rotating the handle
clockwise.
6. Hammer Or Drilling
COntrOl
When drilling masonry and concrete
choose the Hammer position.
When drilling wood, metal, plastic
and screwdriving choose the Drill
position. (See
4
)
7. inserting tOOls
KeyeD CHuCK
Insert tool and tighten equally
in all 3 bores with chuck key(9).
Rotate chuck key (9) clockwise to
tighten the chuck,and rotate it anti-
clockwise to loosen the chuck. (See
5
,
6
)
7
4
5
9
6
