It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Weight:
679 gr (1.49 lb)
- Dimensions:
145 x 55 x 225 mm (5.71 x 2.17 x 8.86 in)
- Air Pressure
4-6 bar
- Vacuum at 6 bar:
90% / 680 mmHg / 26.8 inHg
- Flow rate:
15 SLPM
- Ambient operating temperature: 10 - 40 ºC (50 - 104 ºF)
Complies with CE standards.
ESD protected.
- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
- The power cord must be plugged into approved bases. Make sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- Do not work on electrically live parts.
- Do not leave the appliance unattended when it is on.
- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight as well as persons with reduced
physical, sensory or mental capabilities or lack of experience provided that they have been given
adequate supervision or instruction concerning use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
Safety
Specifications
www.jbctools.com
5
