jbc PHBE-A, Instruction Manual

6

For repetitive jobs 

we recommend

 running profiles without the Thermocouple (TC). In order to do 

so, the 

Teach profile

 mode has to be executed before running any profile. It can be executed from 

the 

Work mode

 menu if the 

Profiles

 mode is selected. Once the profile has been run to the end, the 

system has all the process data which you can save.
Once it is saved, you can run this profile without connecting the Thermocouple (TC). The heating 
process will be the same as long as the same working conditions are respected.

The profiles which already have the data from the 

Teach profile

 are marked with this symbol

These profiles can be run either with or without the Thermocouples. It can be chosen from the 

Profiles

 mode work screen:

Teach profile

Select 

Profile mode

 from the 

Work mode

 menu. In this mode the heater unit regulates the 

temperature of the TC1 thermocouple according to the selected profile as long as the other TCs do 
not reach the control/protection temperature limit.

Profiles mode

14:15

20

º

C

TC1

Stop

20

º

C

TC2

PROFILE1

200

100

20

º

C

TC3

20

º

C

TC4