background image

30

31

Clean periodically

Maintenance

1.

 Connect the tool to the station port by means of the Converter.

2.

 Connect your Robot system to the Robot connector (RJ12) of the station. 

  DB9-RJ12 Adapater available only if necessary (Ref: 0013772).

3.

 Enable the Robot option in the station settings and the notification will be displayed:

4. 

Set your Robot’s commands according to the Robot Communication Protocol, available on the 

  website 

www.jbctools.com/jbcsoftware-menu-115.html

.

Manage and monitor the station using a Robotic system. 

Working with Robots

Control 
Unit

Robot

Update the station software

1. 

Download the JBC Update File from 

www.jbctools.com/software.html 

and save 

it on a USB flash drive. Preferably one with 
no other files.

JBC  

Update File

Before carrying out maintenance or storage, always allow the equipment to cool. 

- Clean the station screen with a glass cleaner 

or a damp cloth.

1.

 Pull off the fuse holder and remove the  

  fuse. If necessary use a tool to lever it off.

2. 

Press the new fuse into the fuse holder  

  and replace it in the station.

- Use a damp cloth to clean the casing and 

the tool. Alcohol can only be used to clean 
the metal parts.

- Periodically check that the metal parts of 

the tool and stand are clean so that the 
station can detect the tool status.

Fuse holder

Fuse holder

- Maintain tip surface clean and tinned prior 

to storage in order to avoid tip oxidation. 
Rusty and dirty surfaces reduce heat 
transfer to the solder joint.

- Periodically check all cables and tubes.

Converter

Ref. 0002747

2. 

Insert the USB flash drive to the station.

The icon         is diplayed while updating.

Fuse

RS-232

connection

   

 
- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.

www.jbctools.com

Summary of Contents for RMVE-B




































Reviews: