Choose the
suction cup
that best fits the component (Maximum working temp.: 250ºC / 482ºF):
10
11
For small components
(fig. 1 and 2).
For big components
(fig. 3 and 4).
1. Suction
2. Release
This tool helps you easily place and remove SMDs of any size using the suction provided by the station.
T260 Pick & Place
Press the button to
start/stop the suction
Once activated
the suction button,
cover the pen hole
with your finger and
pick the component.
Insert the needle
with the appropriate
cup for a correct
suction process.
Lift your finger
to release the
component on the
appropriate place.
You should avoid the
needle to stick out of
the lower part.
We recommend using the pro tripod
We recommend using the extractors
Protectors & Extractors
1
2
3
4
Protectors
* Ref. AxB (mm)
* Ref. AxB (mm)
P3353 4,3 x 3
48
P2230 15 x 15
P3786 5,2 x 5,2
60
P4010 17 x 17
P3352 5,2 x 7,5
P4005 18 x 29
P3355 5,2 x 9,5
P4030 18,5 x 18,5
P3356 6,2 x 4,2
P1068 18,5 x 24
P3785 7,2 x 7,2
P2685 28,5 x 28,5
P3784 8,2 x 8,2
P4085 31,5 x 31,5
P4035 9 x 13
P2672 33 x 46
P4040 9,5 x 19
P4002 50 x 50
P4080 9,5 x 21
P3357 52,5 x 14
32
P2220 10 x 10
P4045 10,5 x 21
P4090 11 x 16
24
P2235 12 x 17
P1249 12 x 23
44
P4000 12,5 x 12,5
P3354 13,2 x 13,2
P4025 13,5 x 21,5
øD
* Reference Desk
Tripods
* Ref. øC (mm)
T2050 39
T2250 85
Manual extractor
* Ref. øD (mm)
E2190 7
Extractors
* Ref. AxB (mm)
* Ref. AxB (mm)
52 E2052 20 X 20
E2124 45 X 45
64 E2064 20 X 26
80 E2184 24 X 24
E2068 27 X 27
E4020 28,5 X 28,5
E4015 31,5 X 31,5
E2084 33 X 33
E2100 38 X 38
Operation
Pick & Place
Ref. T260-A
Tripod
Tripod
Protector
Protector
www.jbctools.com