Temp
º
C
Air %
Time to stop 45 seconds
Power 70%
400 85
400
º
C Select
Operation
Process Control
3. Releasing
1. Placing
2. Heating
For small components
(fig. 1 and 2).
For large components
(fig. 3 and 4).
6
7
Position the extractor with the
appropriate suction cup and
press the suction button.
Heat the component by
pressing the heater button.
The component lifts off
automatically when the
solder melts.
Access Menu (pess key 2 seconds) & Confirm Selection
Selected temperature
Current temperature
% Instant power supplied
to heater
You can switch between operating modes (Manual Mode / Program Mode) by pressing the
“increase” and “decrease” keys simultaneously for 2 seconds (Only when programs mode is ON).
Manual Mode
We recommend using the pro tripod
We recommend using the extractors
Protectors & Extractors
1
2
3
4
Protectors
* Ref. AxB (mm)
* Ref. AxB (mm)
P3353 4,3 x 3
48
P2230 15 x 15
P3786 5,2 x 5,2
60
P4010 17 x 17
P3352 5,2 x 7,5
P4005 18 x 29
P3355 5,2 x 9,5
P4030 18,5 x 18,5
P3356 6,2 x 4,2
P1068 18,5 x 24
P3785 7,2 x 7,2
P2685 28,5 x 28,5
P3784 8,2 x 8,2
P4085 31,5 x 31,5
P4035 9 x 13
P2672 33 x 46
P4040 9,5 x 19
P4002 50 x 50
P4080 9,5 x 21
P3357 52,5 x 14
32
P2220 10 x 10
P4045 10,5 x 21
P4090 11 x 16
24
P2235 12 x 17
P1249 12 x 23
44
P4000 12,5 x 12,5
P3354 13,2 x 13,2
P4025 13,5 x 21,5
øD
* Reference Desk
Tripods
* Ref. øC (mm)
T2050 39
T2250 85
Manual extractor
* Ref. øD (mm)
E2190 7
Extractors
* Ref. AxB (mm)
* Ref. AxB (mm)
52 E2052 20 X 20
E2124 45 X 45
64 E2064 20 X 26
80 E2184 24 X 24
E2068 27 X 27
E4020 28,5 X 28,5
E4015 31,5 X 31,5
E2084 33 X 33
E2100 38 X 38
Current air flow
6
www.jbctools.com
7
