7
MAINTENANCE
CHANGING THE HEATING SET
1. Ensure that the tool is off.
2. Use a wrench to unscrew the connector seal.
REPLACING THE HEATING ELEMENT
Follow this process inverted to re-connect the heating element.
Only perform this operation when the tool is stopped and the heating element set is cold.
1. Untighten screw.
2. Separate the heating element from the heating set’s handle.
3. Connect new heating element, pushing it’s extreme.
4. Insert screw to aviod air-loss witch could reduce the heating element’s lifetime.
3. Pull back the seal.
4. Pull connector from socket to disconnect heating set.
5. Follow steps in reverse to connect the heating set.
0012374
(230V -100V -120V)
Heating element
0012697
Handle
TE-TB
(100V-120V -230V)
Heating set
