background image

19

TROUBLE SHOOTING AND MAINTENANCE

The battery of electric scooter is an extremely 
important part, the battery life determines the 
service life of the scooter. Try to keep the battery 
saturated after each use, to develop such a 
habit, it is recommended to conduct a deep dis-
charge every month! If you don't use an electric 
scooter for a long time, place it in a place to 
avoid bumps and pull out the battery to reduce 
discharge. It is also best not to overload in the 
process of use, which has direct harm to the bat-
tery, so it is not recommended to overload and 
avoid directly affecting the service life of the bat-
tery.

After the electric scooter is used for a 
period of time, it is necessary to check 
the screw loosening of the electric 
scooter to ensure the connection and 
operation between the parts and compo-
nents, and to avoid accidents. 

After being wet by Rain Water. 
Electric walking vehicle should 
be wiped with dry rag in time, 
especially the part containing 
electrical circuit, so that the 
electric walking vehicle can 
keep dry and clean.

If the electric scooter is on the beach, 
gravel or wet road, if there is sand, mud 
or gravel on the tire, it should be cleaned 
in time to prevent some parts from rust-
ing or the tire running badly, which will 
affect the beauty and driving comfort and 
safety.

1. 

2. 

3. 

4. 

Photo 18. 

Photo 19. Check the screw loosening

Photo 20. Wiped with dry rag in time

Photo 21. Clean in time

Conduct a deep discharge 

every month

Summary of Contents for Venture CTS200





































Reviews: