JBJ 28g Nano Cube CF-QUAD, Owner'S Manual

Your Nano-Cube incorporates our Nite-Vu LED’s that simulate 

nocturnal cycles with very dim blue light (nightlights) that casts 
sparkling rays that shimmer for a more natural light cycle com-
monly found in nature. 
A. Connect the single male prong cable from the canopy to the 

small block transformer. May be plugged into a timer for night 
cycles 
B. The Nite-Vu LED lighting is very dim not to disturb the night 
cycles of fish but just bright enough to watch their nocturnal 

behaviors. The Nite-Vu LED lighting is best seen when sur-
rounding light is turned off in the room. 

TURNING ON YOUR LIGHTING SYSTEM (Nite Lite) 

Your 28g Nano-Cube CF-QUAD is pre-installed with a dual illu-
mination  system that offers daylight and nightlight illumination.  

A. Plug power-cord from the canopy into an outlet strip that is 
properly approved and equipped with a fuse or circuit breaker.  
B. Press the switch located on the power cord exiting from the 
canopy  to turn on 105 Watt CF-QUAD  (daytime lamps). This 

will simultaneously start the two cooling fans integrated in the 
canopy  to keep the hood at proper operating temperatures. 

TURNING ON YOUR LIGHTING SYSTEM (Daytime) 

(1) 105 CF-QUAD Combo 
(2) Cooling Fans 
(4) Nite-Vu LEDs 
(1) Integrated Electronic 
Ballast 
(1) Mirror Reflector 
(1) Auto-Shut Off      

Thermal Protector 

13