JBJ 28G Nano-Cube WIFI, Manual

13 

HANDLING PRECAUTIONS 

Never attempt to move a full or partially full Nano-Cube. 
Never lift by grabbing the aquarium frame 

Never use cleaners that contain ammonia to clean the glass sur-
faces.  Always lift and carry the Nano-Cube from underneath 
giving support to the bottom at all times. 

CHOOSING A LOCATION 

A. With a Nano-Cube Stand 

1. Find a leveled surface and place Nano-Cube on top of 

stand before filling with water. Make sure that no part of the 
tank is overhanging the stand. 

B. Without a Nano-Cube Stand 

1. Find a leveled surface that can support the weight of 

the tank, water, and livestock. An average aquarium can weigh 
10lbs per gallon once filled with water, rock, gravel, and other 

accessories. 
 

2. Do not place in direct sunlight to prevent excessive 

algae growth and higher water temperatures. 

FILLING THE TANK 

Always dechlorinate tap water before adding into the aquari-
um. Always fill with room temperature water.  

Rinse Activated Carbon which is located in the rear filter com-
partment under the sink for 30 seconds or until water runs 
clear. 
Fill the main body of the Nano-Cube until water flows through 

the overflow grill into the rear filter chamber. Once the rear filter 
chamber is full, plug  pumps into an approve house surge pro-
tector or the Ocean Pulse Wavemaker. Once pumps are on, 
water will flow from the rear filter chamber through the direc-

tional flow nozzles into the main body of the Nano-Cube. Ad-
just accordingly to desired flow position.