SAFETY PRECAUTIONS
The following safety information is designed to ensure the long life of your projector.
Read these instructions carefully and abide by the warnings.
LOCATION
Place the unit in an area relatively free from dust and moisture. Do not place the
Projector in direct sunlight or near stoves or other heat radiating appliances. Avoid
rough handling which can damage internal parts of the set.
Provide adequate ventilation to prevent heat built up within the cabinet.
CLEANING
Unplug the set from the wall before cleaning. Use a soft, damp cloth. A mild soap
solution may be used to remove heavy stains. Do not allow moisture to enter vent
openings; severe damage or shock/hazard could result. Do not attempt to clean
the lenses with dry cloth or paper. Remove dust with a lens brush or
compressed air. Both are available at camera stores. Persistent spots, fingerprints
and other dirt may be carefully removed by gently wiping the lenses with a water
moistened cloth or soft paper tissue.
POWER
Use only 120V AC, 60 Hz line current. Handle the power cord carefully. A damaged
cord could be hazardous. Unplug the unit by grasping the plug; do not pull on the
cord. Unplug the power cord when you will not use the Projector for prolonged
periods.
PRECAUTIONS
Keep the inside free of foreign objects - nails, clips, pins, etc. Do not
insert metallic objects or wire into openings in the cabinet. This can cause electric
shock.
-21 -
