JBL CINEMA PROPACK 600 Owner'S Manual Download

Page: 47 / 72

Configuring the DVD600

DVD Changer

only one title, but some may have more than
one, to give you a “Double Feature” presenta-
tion or to include special presentations that take
you “behind the scenes” of the main feature.
Press the Title button to see a listing of the
titles on a disc. When a disc has only one title,
pressing the Title button may show a list of the
chapters.

The DVD600

is turned on in two steps.

First, press the

Main Power Switch

the front panel until it latches and the

Power

Indicator

lights. Then, press the

System

Power Control

or use the remote control

to select

DVD

and turn on the unit

Using the Remote Control

To access the Setup Menu, press the

Menu

Button

. The Setup Menu will appear on

the video display screen (Figure 1a). The left
side of the screen will show the various options,
and the box on the right side of the screen will
show the current defaults. The box in the lower
left corner of the screen will read “Resume” if
you were playing a disc and pressed the

Stop

Button

once, thus placing the

DVD600

in Resume mode (see Figure 1a). If

you pressed the

Stop Button

twice,

this box will read “Play” (see Figure 1b).

Figure 1a

Figure 1b

To navigate through the settings on the screen,
use the

⁄

Buttons

to scroll up or

down through the list of settings or the list of
options. Press the

‹

›

Buttons

move back and forth between the list of settings
and the list of options for those settings. To
choose a specific option, use the

⁄

Buttons

until it is highlighted. Press the

Enter

Button

to select the choice. When a

selection is made, you may confirm the choice
by checking to see that a dot fills the “radio but-
ton” circle next to the choice. This filled circle,
not the highlighted option, is the active choice.

Selecting Audio Output Languages

The Audio Language option sets the default
choice for the language that will be played from
a DVD disc. To select the language default, go
to the Setup Menu (Figure 1), which is available
by pressing the

Menu Button

while the

unit is in the Stop mode. Audio Language
Selection is the first option and will be high-
lighted in teal when the Setup Menu is displayed.

To change the default language, press the

›

Button

. The list of system defaults will

be replaced with a list of available options, as
shown in Figure 2. The current language choice
will be indicated by a filled-in circle on the right
side of the screen.

Figure 2

To change the default setting, press the

⁄

Buttons

until the desired choice

is highlighted, and then press the

Enter Button

. Note that the circle for your choice will

fill in, and the menu will return to the default
listings.

If you wish to change the default to a language
other than English, Spanish or French, press the

⁄

Buttons

until the “Other” line

on the bottom is highlighted. Consult the
Language Codes list on page 65 for the desired
language. Press the

Enter Button

, and

then enter the four-digit code from the list using
the

Numeric Keys

–

Although your selection will be entered, the
word “Other” will appear on the default list.

Note that when a default language is selected,
it will be used whenever that language is present
on the DVD disc being played. However, when
that language is not present, the language used
will be the one preprogrammed into the disc
itself. (Typically, that default will be English for
discs sold in Region 1, but the selection will
vary at the discretion of the disc’s producer.)

Although the default will set the language that
will be used when a disc is first put into play,
the language may easily be changed at any time
by using the

Audio Button

If you have no other changes to make after set-
ting this default, press the

Menu Button

to remove the Setup Menu from the screen, or
press the

Play/Pause Button

begin or resume playback.

Selecting Subtitle Languages

The Subtitle Language option sets the default
choice for the language that will be displayed
when subtitles are turned on during DVD
playback.

To select the Subtitle Language default, you must
be viewing the Setup Menu (Figure 1), which is
available by pressing the

Menu Button

while the unit is in the Stop mode. At the Setup
Menu, press the

Button

until the

Subtitle Language option is highlighted.

To change the default Subtitle Language, press
the

›

Button

and note that the list of

system defaults will be replaced with a list of
the available options, as shown in Figure 3. The
current subtitle language choice will be indicated
by a filled-in circle in the list on the right side of
the screen.

Figure 3

To change the default setting, press the

⁄

Buttons

until the desired choice is

highlighted, and then press the

Enter Button

Note that the circle for your choice will fill in,
and the menu will return to the default listings.

If you wish to change the subtitle default to a
language other than English, Spanish or French,
press the

⁄

Buttons

until the