JBL CINEMA PROPACK 600 Owner'S Manual Download

Page: 56 / 72

Operating the DVD600

DVD Changer

Loading Discs

To load discs in the DVD600

, first make certain

that the unit is turned on by pressing the

Main

Power Switch

so that it latches, and

then the

System Power Control

or the

Open/Close Button

Play/Pause

Button

. The

Status Indicator

turns green.

Next, if needed, press the

Open/Close Button

until the

Disc Tray

opens.

Holding the discs by the edge, gently place each
one into one of the compartment slots in the
drawer. Note that there is a number embossed
onto the drawer tray at the right of the disc slot.
This is the number for that specific disc position;
it will be used to indicate the disc in both the
Information Display and the on-screen displays.

When loading discs, please note the following:

• The DVD600

will play discs with the following

logos only. DO NOT attempt to play another
type of disc, as shown in the list on page 46.

• The DVD600

will only play discs in the NTSC

video format. It will not play discs for other
standards such as PAL or SECAM.

• Playback capability for CD-RW discs will vary

according to the quality of the CD-RW disc.
On some occasions, it is possible that CD-RW
discs may not play on the DVD600

. This does

not indicate any problem with the DVD600

• The DVD600

will only play discs that are

coded for Region 1 or discs that are open to
being played in all regions. Discs that contain
a Region Code of 2, 3, 4, 5 or 6 (as noted by a
number inside a world map logo on the disc’s
cover jacket or case) will not play.

• Both 5-inch (12cm) and 3-inch (8cm) discs may

be used.

• When loading CD audio discs, load the discs

with the label side up.

• When loading DVD discs with printed labels,

load them label side up.

• Some DVD discs are double-sided. The title

information for these will be printed on the
inner ring of the disc, very close to the center
hole. The title for the side you wish to play
should be facing up.

• The DVD600

is also capable of playing discs

containing MP3 audio files.

Notes on DVD-Audio discs:

• The DVD600

is not capable of playing selec-

tions in the DVD-Audio format. However, many
DVD-Audio discs include audio tracks in the
PCM, Dolby Digital or other formats which the
DVD600

is capable of playing. You may need

to press the

Title Button

rather than the

Menu Button

in order to access these

formats.

• Some DVD-Audio discs display a still picture
while a selection is playing. Sometimes, this
picture may disappear when play is stopped and
the DVD600

is placed in the Resume mode. To

restore the picture, fully stop play by pressing
the

Stop Button

twice before contin-

uing play.

Figure 17. On Screen Library Display

To move the discs in the tray so that you may
insert discs in slots that are partially hidden
inside the disc tray drawer, press the

Disc Skip

Button

. Each press of the button will

move the carousel tray one position to the left
(counterclockwise). There may be a slight delay
of several seconds before the carousel moves to
the next disc, which is normal. You may avoid
the delay by pressing the

Disc Skip Button

twice.

• To access all disc positions, the unit must be

in the full-stop position. If the unit is in the
Play mode, press the

Stop Button

twice.

• If the disc tray drawer is opened while a disc

is playing, the Play Exchange feature allows
you to change the remaining four discs.
Simply press the

Disc Skip Button

to move the discs in the tray in one direction
or the other.

IMPORTANT NOTES

ON DISC LOADING

• Remove all discs from the tray before

moving the player.

• Make certain that all discs are properly seated

before closing tray drawer.

• Do not push the disc tray drawer with the

power off.

• Do not attempt to change or touch the disc

tray carousel while it is moving.

• Do not attempt to rotate the disc tray by

hand. If the tray drawer or carousel tray
appears to be stuck, contact your local JBL
authorized service center.

• Do not load more than one disc in each slot in

the tray and do not attempt to place a stan-
dard 5-inch (12cm) disc over a smaller 3-inch
(8cm) disc.

Once the discs are loaded, press the

Open/

Close Button

to close the disc tray.

When the tray drawer closes, the disc that was
last in the center position facing outward in the
tray will be readied for playback. After the
drawer closes, you will see an indication of

Reading

in the Information Display to alert

you to the fact that the unit is determining the
type of disc (DVD, MP3 or CD) and is reading
the data for track, chapter, title and other infor-
mation about the disc. At the same time, the

Disc Number Indicator

for the disc in use

will begin to flash, indicating which disc is
ready to be played.

You will also see the On Screen Library dis-
played (see Figure 17). It will take about one
minute for all discs to be identified. You may
interrupt the process by pressing Stop, by press-
ing Enter to select a disc, or by scrolling down
to the Exit button. When the process is com-
plete, press Play to play the current disc, or
scroll to select any disc.

If the tray was closed by pressing one of the
five

Direct Access Buttons

on the

front panel, the On Screen Library will not be
activated.

You may access the On Screen Library later by
stopping play of the current disc and pressing
the

On Screen Library Button

. Use the

⁄

Buttons

to scroll to the desired

disc, and the

Set Button