JBL CINEMA PROPACK 600 Owner'S Manual Download

Page: 60 / 72

Operating the DVD600

DVD Changer

Press the

‹

›

Buttons

until the

camera icon with the letters “Ang” below it (fifth
from the left) is highlighted in white between
yellow brackets.

Press the

Enter Button

Note that the main Menu Bar will be replaced

with a single display of the angle number
(Figure 21).

Figure 21

Press the

Enter Button

until the desired

angle is shown. Note that the number of angles
available is set by the disc’s producer, not the
DVD600

, and it may vary from disc to disc.

You may also change the angle directly by
pressing the

Angle Button

when multiple

angles are present, until the desired angle
appears on the screen.

Playing CDs

The DVD600

allows you to take advantage of

the on-screen Menu Bar even when playing
CDs. The use of this graphical display makes it
easy to select CD Functions.

When a CD is playing, the Menu Bar will auto-
matically appear in your video display, even
though there is no video on the CD itself. To
remove the Menu Bar at any time, press the

Clear Button

. If the Menu Bar is not pres-

ent, press the

Status Button

to have it

appear on the screen (Figure 22).

Figure 22

Track:

The number shown indicates the number

of the track that is currently playing.

IntroScan:

When the IntroScan feature is

active, the musical notes in this icon will
change.

Bookmarks:

Highlight this area and press enter

to enter or go to bookmarked locations on a disc.

Time Display Type:

This shows the type of

time indication being shown: Time Remaining
for the Current Track, Total Elapsed for the Disc,
or Total Remaining for the Disc.

Disc Type:

Shows the type of disc being played.

Disc Number:

The slot number of the disc being

played is shown.

Time Indicator:

The time indication selected

is shown.

Once the Menu Bar appears, press the

‹

›

Buttons

to move across the display

to select the desired option. When the option to
be changed is highlighted, press the

Enter

Button

to change the setting for that

option.

Selecting a Track

To select any track on a CD, follow these steps:

Enter the track number while the disc is playing
or in Pause mode by entering its number, or:

During disc playback, press the

Status Button

if the Menu Bar is not already on the screen.

If needed, press the

‹

›

Buttons

until the disc icon with the letter “T” underneath
it is highlighted in white between yellow brackets.

Press the

Enter Button

Note that the number to the right of the “T”

will be replaced with two dashes (– –).

Using the

Numeric Keys

–

enter the number of the track to be accessed.

The desired title will automatically be started.

Using IntroScan

The IntroScan feature allows you to sample the
tracks on a CD by playing the first ten seconds
of each track and then moving to the next track.
To use IntroScan, follow these steps:

During disc playback, press the

Status Button

if the Menu Bar is not already on the screen.

If needed, press the

‹

›

Buttons

until the musical score icon with the phrase
“IntroScan” underneath it (second from the left)
is highlighted.

Press the

Enter Button

Note that the disc will immediately begin to

play the first track on the disc and the musical
notes in the icon will change and flash.

The unit will play the first ten seconds of

each track on the disc, moving from one track to
the next.

To play a track during IntroScan, press the

Play/Pause Button

If no track is selected, the disc will stop play-

ing when it has played the first ten seconds of
each track in order.

Note that while the IntroScan feature is in use,
the

Intro Indicator

will appear in the

Information Display

Time Display Selection

When playing CDs, the DVD600

is capable of

displaying the time displays that you are famil-
iar with from traditional CD-only players. The
choice of a time display is made through the use
of the on-screen Menu Bar, but any changes to
the display will also change the Time Display
mode for the Information Display.

To change the time display during CD playback,
follow these steps:

During disc playback, press the

Status Button

if the Menu Bar is not already on the screen.

If needed, press the

‹

›

Buttons

until the clock icon with the word “Time” next to it
is highlighted.

Press the

Enter Button

to select one of

these four choices. Each press of the button will
select the next option:

•

Track Elapsed:

This shows the time that has

elapsed for the current track. At the start of
each track this display will reset to zero and
begin to count up again.

•

Track Remain:

This shows the time

remaining for the current track. At the start of
each track the time will begin to count down
again, starting with the total time of the
track.

•

Disc Elapsed:

This shows the total time that

the current disc has played for all tracks.

•

Disc Remain:

This shows the total time

remaining for all tracks on the disc that have
not yet been played.

Playing MP3 and Video CD Discs

The DVD600

is rare among DVD players in that

it is able to play discs containing MP3 audio
files. This means that you may enjoy the latest
music, using discs created in your computer,
through the high quality audio components in
your home theater system. As the way that MP3
files are recorded on discs differs from the way
conventional CD audio discs are structured, MP3
playback is somewhat different from standard CDs.