5
JBL CINEMA SB150
ENGLISH
REMOTE CONTROL FUNCTIONS
2
1
4
5
7
8
6
10
11
3
9
The following command buttons are included with the remote control:
1. Power on/Standby
2. Bluetooth
3. Aux-In (Analog)
4. Optical (Digital)
5. Audio Feedback
6. Mute
7. /-
8. Bass /-
9. Movie EQ
10. Music EQ
11. News EQ
Power on/Standby:
To bring the JBL CINEMA SB150 to
operational mode from Standby mode, press the Power button (the power
indicator on the JBL CINEMA SB150 will turn green). To put the system in the
Standby mode, press the power button while the system is switched ON (the
power indicator on the JBL CINEMA SB150 will turn amber). If you do not press
the Power button, the JBL CINEMA SB150 will automatically go into Standby
mode approximately 10 minutes after the audio input signal stops.
Bluetooth:
This button is used to set the soundbar into Bluetooth
mode. It is also the same button that will be used to pair your system with
Bluetooth-enabled devices. Use a Short Press to switch to Bluetooth source.
Press and hold to make the unit go into pairing mode.
NOTE:
JBL CINEMA SB150’s Bluetooth device name is
CINEMA SB150.
Aux-In (Analog):
Press this button to select an Analog source.
Optical (Digital):
Press this button to select a Digital source.
Audio Feedback:
The Audio Feedback button on the remote
control enables/disables audio feedback. When enabled, this feature will add
an audible tone to help you recognize when these other features are engaged:
1. Bluetooth
2. Harman Volume on/off
3. Subwoofer volume control
4. Audio feedback on/off
When Audio Feedback is disabled, you will not hear any audible tone when
using these functions.
Mute:
Press the mute button to mute the sound, press the mute button
again or any Volume button to release the mute control.
/-:
Press the “+” button to increase volume; press the “–”
button to decrease volume.
Bass /-:
The Bass +/- buttons on the remote control
increase and decrease the bass levels.
Movie EQ:
Use this button to switch sound setting of system into
Movie EQ.
Music EQ:
Use this button to switch sound setting of system into
Music EQ.
News EQ:
Use this button to switch sound setting of system into News
EQ.
PLACING THE JBL CINEMA SB150
Placing the soundbar on a table
< 5m
If your TV is placed on a table, you can place the soundbar on the table directly
in front of the TV stand, centered with the TV screen. As long as the surface of
the table is flat, the soundbar will rest on its metal feet.
Wall-mounting the soundbar
688mm
688mm
~3mm
If your TV is attached to a wall, you can use the included wall-mount bracket to
mount the soundbar on the wall.
