JBL DA850 DA1650 Owners Manual | rev1.2 Draft20231009
Pg 4 of 16
©2023 Harman International | Features, Specifications, and Appearance subject to change without notice.
Front Panel Overview
1 CHANNEL STATUS LED INDICATORS
These LEDs indicate the status of each of the amplifier
channel pairs when active.
When a channel is active, its LED indicator will glow WHITE. If
the channel is in standby, the LED will be off. If clipping is
present while playing an input source, the LED will flash
YELLOW. If a channel has a fault, the LED will blink RED
indicating the presence of a short or some other problem
related to that channel pair.
2 STANDBY
BUTTON
Activates and deactivates standby mode when the amplifier is
connected to AC power.
When the amplifier is connected to AC power, the standby
button LED will glow dim BLUE indicating that the unit is in
standby mode. In this state, the power amplifier section is not
activated and the unit consumes minimal AC power. Pressing
the standby button from this state will activate the power
amplifier section and the standby button LED will glow WHITE
indicating that the amplifier is powered on.
NOTE:
If the trigger input is used, it will override the standby
button operation