JBL DVD600 II, Service Manual

13

Preset Up/Down/Slow-Play

Buttons:

When the tuner is in use, press these

buttons to scroll through the stations pro-
grammed into the receiver’s memory.  

When a DVD disc is playing and the DVD600

II

has been selected, press these buttons to
move forward or backward through the disc in
slow speed. Each press of these buttons
changes the slow-play speed in the following
order: 1/16 Normal Speed 

➔

1/8 Normal

Speed 

➔

1/4 Normal Speed 

➔

1/2 Normal

Speed. To resume normal play, press the

Play/Pause Button

. These buttons

do not function when a CD is playing.

Night Mode/Random:

Activates the

Night mode of the DCR600

II

. This mode is

available in specially encoded digital sources,
and it preserves dialogue (center channel)
intelligibility at low volume levels.

When the DVD600

II

has been selected, press

to begin the playback of all tracks on a disc in
random order.

Disc Skip Button:

Press twice in rapid

succession to move to the next available disc
in the tray when using a DVD or CD player.
This button has no direct effect on the
DCR600

II

. When a single press of this button is

followed by a disc number, the DVD600

II

will

skip directly to that disc.

Check:

This button only functions when

the DVD600

II

has been selected. When a CD is

playing, press this button to check the status
of the current disc via the on-screen display.
This button is also used to verify the contents
of a programmed playlist via the front-panel
Information Display.

Subtitle On/Off:

This button only 

functions when the DVD600

II

has been selected.

When a DVD is playing, press this button to
turn the Subtitle Display on or off.

Repeat:

This button only functions when

the DVD600

II

or a CD player has been selected.

Press to select one of the Repeat-Play modes:
Repeat All (discs), Repeat 1 Disc, Repeat Title,
Repeat Track/Chapter. Each press of the 
button shows the choice selected in both the
on-screen Status Banner display or in the

Repeat Indicators 

in the front panel

Information Display.

Repeat A–B:

This button only functions

when the DVD600

II

has been selected. Press

once to begin the selection of a portion of a
disc to be repeated. Press it again to choose
the end point of the repeat-play selection. This
function is unavailable during programmed or
random play.

NOTE:

When any of the following buttons

–

is pressed while the remote has

selected the Main Page, the remote will 
automatically switch to control of the DVD, as
indicated by the 

DVD Input Selector

d

lighting.

Reverse Search/Rewind:

When the

DVD600

II

has been selected, press to move

backward through a CD or DVD at one of four
speeds. Each press and release will increase
the search speed, in the following order: R.
Search x 2 

➔

R. Search x 4 

➔

R. Search x 8

➔

R. Search x 16. Once you have selected the

desired speed, release the button, and the 
disc will continue to search at fast speed. 
To resume normal playback, press the 

Play/

Pause Button

.

When a tape deck or VCR has been selected,
this button rewinds the tape.

Play Button:

Press to begin playback

when the DVD600

II

has been selected. If the

disc tray drawer is open, it will automatically
close when the button is pushed. Pressing the
Play button when the unit is in the Standby
mode will turn the unit on and begin playback
of the last disc in use.

When a CD player, tape deck or VCR has been
selected, pressing this button will also begin
playback. See the owner’s manual for that
device for more information on the operation
of the play function as it affects that device.

Forward Search/Fast Forward:

When 

the DVD600

II

has been selected, press to move 

forward through a CD or DVD at one of four
speeds. Each press and release will increase
the search speed, in the following order: 
F. Search x 2 

➔ 

F. Search x 4 

➔

F. Search 

x 8 

➔

F. Search x 16.  Once you have selected

the desired speed, release the button, and the
disc will continue to search at fast speed. To
resume normal playback, press the 

Play/

Pause Button

. When a tape deck 

or VCR has been selected, this button fast-
forwards the tape.

Record Button:

This button only func-

tions when a CD/CD-R, tape deck or VCR con-
nected to the 

Video 1 Input

lmno

has been selected. See the owner’s manual for
that device for further information on how to
make recordings.

Stop Button:

This button has no effect

on the DCR600

II

. When the DVD600

II

has been

selected, press this button once to place the
disc in the Resume mode. Playback will stop,
and as long as the tray is not opened or the
disc changed, DVD playback will continue 
from the same point on the disc when the

Play/Pause Button

is pressed

again, even if the unit has been turned off in
the interim. To stop a disc without entering
Resume mode, press the Stop button twice.

This button also performs the Stop function
when a CD player, tape deck or VCR connected
to the 

Video 1 Input

lmno

has

been selected.

Pause Button:

Press to pause the disc in

use. To resume playback, either press the
Pause button again, or press the 

Play/Pause

Button

.

Previous/Next:

Press to move 

backward or forward through the music tracks
on a CD disc or the chapters on a DVD disc.
This button also scans backward or forward
when a VCR connected to the 

Video 1 Input

lmno

has been selected.

On Screen Library™ (patent pending):

This feature lists the titles and disc types of all
discs currently loaded in the DVD600

II

on your

video screen. The On Screen Library resets
automatically every time the DVD600

II

’s disc

tray is opened. When the tray is closed, the On
Screen Library will need to read and identify
all five discs, a process which will take approx-
imately one minute. You may interrupt this
process by pressing the 

Stop Button 

.

The On Screen Library will resume the process
of identifying the discs when you press the 

On

Screen Library Button 

. You may also

prevent the On Screen Library from reading
and identifying the discs by closing the tray
with a press of one of the 

Direct Access

Buttons ,

which will begin play of that

numbered disc.

If you have not opened the disc tray since the
last time the On Screen Library was accessed,
and if the current disc is stopped, you may
press this button to display the On Screen
Library, even if you have not selected DVD as
the input source on the DCR600

II

. While in

DVD mode, use the 

⁄

/

¤

Buttons

y

to

scroll through the list. Press the 

Set Button

to play the selected disc. Do not press a

Numeric Key

–

,

while the

On Screen Library is displayed, as it will
remove the display without skipping to a 
different disc.

Program Indicator LED:

Lights while 

programming the remote with device codes,
macros, punch-through functions and device
reassignments, or while resetting the remote
memory.

DVD600II