24
Preset Up/Down/Slow-Play
Buttons:
When the tuner is in use, press these
buttons to scroll through the stations pro-
grammed into the DCR600’s memory.
When a DVD disc is playing and the DVD600
has been selected, press these buttons to
move forward or backward through the disc in
slow speed. Each press of these buttons
changes the slow-play speed in the following
order: 1/16 Normal Speed
➔
1/8 Normal
Speed
➔
1/4 Normal Speed
➔
1/2 Normal
Speed. To resume normal play, press the
Play
Button
. These buttons do not func-
tion when a CD is playing.
Night Mode/Random:
Activates the
Night mode of the DCR600. This mode is avail-
able in specially encoded digital sources, and
it preserves dialogue (center-channel) intelligi-
bility at low volume levels.
When the DVD600 has been selected, press to
begin the playback of all tracks on a disc in
random order.
Disc Skip Button:
Press to move to the
next available disc in the tray when using a
DVD or CD player. This button has no direct
effect on the DCR600.
Check:
This button only functions when
the DVD600 has been selected. When a CD is
playing, press this button to check the status
of the current disc via the on-screen display.
This button is also used to verify the contents
of a programmed play list via the front-panel
Information Display.
Subtitle On/Off:
This button only
functions when the DVD600 has been selected.
When a DVD is playing, press this button to
turn the Subtitle Display on or off.
Repeat:
This button only functions when
the DVD600 or a CD player has been selected.
Press to select a Repeat-Play mode. Each press
of the button shows the choice selected in both
the on-screen Status Banner display or in the
Repeat Indicators
in the front-panel
Information Display.
Repeat A–B:
This button only functions
when the DVD600 has been selected. Press
once to begin the selection of a portion of a
disc to be repeated. Press it again to choose
the end point of the repeat-play selection.
NOTE:
When any of the following buttons
–
is pressed while the remote has
selected the Main Page, the remote will
automatically switch to control of the DVD, as
indicated by the DVD
Input Selector
d
lighting.
Reverse Search/Rewind:
When the
DVD600 has been selected, press to move
backward through a CD or DVD at one of four
speeds. Each press and release will increase
the search speed, in the following order: R.
Search x 2
➔
R. Search x 4
➔
R. Search x 8
➔
R. Search x 16. Once you have selected the
desired speed, release the button, and the
disc will continue to search at fast speed. To
resume normal playback, press the
Play
Button
.
When a tape deck or VCR has been selected,
this button rewinds the tape.
Play Button:
Press to begin playback
when the DVD600 has been selected. If the
disc tray drawer is open, it will automatically
close when the button is pushed. Pressing the
Play button when the unit is in the Standby
mode will turn the unit on and begin playback
of the last disc in use.
When a CD player, tape deck or VCR has been
selected, pressing this button will also begin
playback. See the owner’s manual for that
device for more information on the operation
of the play function as it affects that device.
Forward Search/Fast Forward:
When
the DVD600 has been selected, press to move
forward through a CD or DVD at one of four
speeds. Each press and release will increase
the search speed, in the following order:
F. Search x 2
➔
F. Search x 4
➔
F. Search
x 8
➔
F. Search x 16. Once you have selected
the desired speed, release the button, and the
disc will continue to search at fast speed. To
resume normal playback, press the
Play
Button
.
When a tape deck or VCR has been selected,
this button fast-forwards the tape.
Record Button:
This button only func-
tions when a CD/CDR, tape deck or VCR con-
nected to the Video 1 input has been selected.
See the owner’s manual for that device for fur-
ther information on how to make recordings.
Stop Button:
This button has no effect
on the DCR600. When the DVD600 has been
selected, press this button once to place the
disc in the Resume mode. Playback will stop,
and as long as the tray is not opened or the
disc changed, DVD playback will continue from
the same point on the disc when the
Play
Button
is pressed again, even if
the unit has been turned off in the interim. To
stop a disc without entering Resume mode,
press the Stop button twice.
This button also performs the Stop function
when a CD player, tape deck or VCR connected
to the Video 1 input has been selected.
Pause Button:
Press to pause the disc in
use. To resume playback, either press the
Pause button again, or press the
Play Button
.
Previous/Next:
Press to move
backward or forward through the music tracks
on a CD disc or the chapters on a DVD disc.
This button also scans backward or forward
when a VCR connected to the Video 1 input
has been selected.
64
63
10D
58
62
10D
58
61
60
10D
58
59
58
10D
58
57
64
57
56
55
54
53
51
50
10D
58
52
48
Summary of Contents for DVD600
Page 1: ......
