JBL DVD600 Owner'S Manual Download

Page: 51 / 73

Configuring the DVD600 DVD Changer

(Continued)

After the password has been entered once, a
second set of data entry boxes will appear, asking
you to confirm the entry. Using the same method
described earlier, enter the password again.
When all four numbers have been repeated, press
the

Enter Button

to set the password in

the DVD600’s memory. If the two passwords do
not agree, an “Incorrect Password” message
will appear to ask you to try entering the
number again.

Once this password is entered, you will need to
use this four-digit number to view a disc when
the rating of the disc exceeds the settings
entered in the Ratings Menu. If a password
has been entered, it is also required that you
change the settings range in the Ratings Menu.
Finally, the password is required if you wish to
unlock the system again to permit access to the
Ratings Menu.

If you have no other changes to make after set-
ting this default, press the

Menu Button

to remove the Setup Menu from the screen, or
press the

Play Button

to begin or

resume playback.

Clearing Passwords

Once a password has been entered, the system
remains locked until the password is cleared. To
clear a password so that the ratings may be
changed or to permit any movie to be viewed
regardless of ratings, you must be viewing the
Setup Menu (Figure 1), which is available by
pressing the

Menu Button

while the unit

is in the Stop mode. At the Setup Menu, press
the

Button

until the Password option is

highlighted. As the system is locked, you will
first be asked to enter the password previously
set. Enter that password using the

Numeric

Keys

–

and then press the

Enter Button

Figure 8

To clear the password lock once you have
entered the correct password, press the

Button

so that the words “Clear

Password” are highlighted in light blue (Figure
8). Next, press the

Enter Button

to com-

plete the process. Note that the wording for
Clear Password will change to white as a confir-
mation that the system is now unlocked.

If you have no other changes to make after set-
ting this default, press the

Menu Button

to remove the Setup Menu from the screen, or
press the

Play Button

to begin or

resume playback.

Changing the Password

If you feel that the password has become known
to an unauthorized person, you may change the
password without unlocking the system. To
change a password, you must be viewing the
Setup Menu (Figure 1), which is available by
pressing the

Menu Button

while the unit

is in the Stop mode. At the Setup Menu, press
the

Button

until the Password option is

highlighted. As the system is locked, you will
first be asked to enter the password previously
set (Figure 9). Enter that password using the

Numeric Keys

–

and then

press the

Enter Button

Figure 9

Figure 10

To change the password, press the

Button

so that the words “Change Password” are

highlighted in light blue (Figure 10). Next, press
the

Enter Button

. On the next screen that

appears (Figure 11), enter the new four-digit
password directly by using the

Numeric Keys

–

, or you may use the

⁄

Buttons

to select the number

for a position, and then press the

›

Button

to move to the next position. Note that as each
number is entered, it will turn to a solid circle
when you move to the next position to protect
the password’s privacy. When all four numbers
of the password have been entered, press the

Enter Button

Figure 11

After the password has been entered once, a
second set of data entry boxes will appear, ask-
ing you to confirm the entry (Figure 12). Using
the same method described above, enter the
password again. When all four numbers have
been repeated, press the

Enter Button

set the password in the DVD600’s memory. If
the two passwords do not agree, an “Incorrect
Password” message will appear to ask you to
try entering the number again.

Figure 12

Once the new password has been entered, the
system remains locked with the new password
in effect. If you have no other changes to make
after setting this default, press the

Menu

Button

to remove the Setup Menu from the

screen, or press the

Play Button

begin or resume playback.

10D