background image

ENGLISH

-4-

• Complete, self-powered DTS,

Dolby* Digital surround
processor with four satellite
speakers, a center channel
loudspeaker, subwoofer,
remote control, and all ampli-
fication built-in. 
(Just Add TV!)

• Dolby Digital, DTS, Dolby Pro

Logic*, including Phantom
and 3-Stereo, and Stereo
listening modes.

• Automatic Turn-On and Turn-

Off.

• Automatic Source Switching

for the digital inputs.

• Two digital (one optical and

one coaxial) inputs and two
analog inputs.

• 2-Way video-shielded micro-

satellites with titanium-lami-
nate tweeters and common
voicing for all five channels,
and a 6.5", long-throw, floor-
firing subwoofer.

• Late Night compression for

nighttime listening without
unexpected and objectionably
loud passages.

• All amplification and controls

are mounted in the sub-
woofer, eliminating the need
for a separate control unit.

• Remote controllable via out-

board remote eye that can be
mounted with the center
channel or separately, so that
the subwoofer can be hidden
away. 

Features

4 satellites and a center channel
loudspeaker.
Wall-mount brackets.

“Smart” powered
subwoofer/controller.

Included

JBL ”error-free“ speaker cables. 

Foot for horizontal placement of
center speaker. Versatile remote
sensor and double-sided tape
provided.

Remote control.

Bass

Treble

Delay

Level

0 dB

Test

Adjustment

Late Night

Power

Mute

Surround 

Mode

Input

+

+

+

Volume

Digital coax input cable and
analog RCA input cable.

Summary of Contents for escXcite















Reviews: