All features and specifications are subject to
change without notice.
† The maximum recommended amplifier power
rating will ensure proper system headroom to
allow for occasional peaks. We do not recom-
mend sustained operation at these maximum
power levels.
* Dolby is a trademark of Dolby Laboratories.
DTS is a registered trademark of
Digital Theater Systems, Inc.
HTI6
Frequency Response
38Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
8-1/2" x 11" (216mm x 279mm)
Mounting Cutout Size
(W x H)
7-1/8" x 9-11/16" (181mm x 246mm)
Mounting Depth
3-7/8" (98mm)
Weight per Speaker
11 lb (5kg)
HTI8
Frequency Response
30Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
90dB (2.83V/1m)
Crossover Frequency
2,500Hz
Woofer
8" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size (W x H)
10-1/8" x 13-1/8" (257mm x 333mm)
Mounting Cutout Size
(W x H)
8-7/8" x 11-13/16" (225mm x 300mm)
Mounting Depth
4" (102mm)
Weight per Speaker
13.5 lb (6.1kg)
HTI55
Frequency Response
40Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
120 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
Dual 5" polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/Elliptical Oblate Spheroidal
™
(EOS) waveguide, and swivel mount
Plate Size
15-3/8" x 7-1/2" (391mm x 191mm)
Mounting Cutout Size
14" x 6" (356mm x 152mm)
Mounting Depth
3-7/8" (98mm)
Weight per Speaker
5.7 lb (2.6kg)
HTI6C
Frequency Response
40Hz – 20kHz (–10dB)
Recommended
Maximum Amplifier
Power
†
100 watts
Impedance
8 ohms nominal
Sensitivity
88dB (2.83V/1m)
Crossover Frequency
2,000Hz
Woofer
6-1/2" Polymer-coated aluminum
cone w/rubber surround
Tweeter
1"Pure-titanium dome,
w/swivel mount
Plate Size (Diameter)
9-3/16" (233mm)
Mounting Cutout Size
(Diameter)
7-7/8" (200mm)
Mounting Depth
4-1/4" (108mm)
Weight per Speaker
10 lb (4.5kg)
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility that the products described in this
owner’s manual are in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Gary Mardell
Harman Consumer International
Chateau-du-Loir, France 4/04
DESIGN GOAL:
Combine the superior performance of traditional
JBL loudspeakers with the convenience of in-wall installation.
TWEETER TYPE:
Pure-titanium dome with EOS
™
waveguide,
and swivel mount
WOOFER TYPE:
Polymer-coated aluminum cone with rubber surround
CROSSOVER NETWORK:
Straight-Line Signal Path
™
(SSP)
PROFESSIONAL REFERENCE:
Studio Monitor
OWNER’S GUIDE
PRODUCT LINE:
MODELS:
HTI6, HTI8, HTI55 and HTI6C
JBL Home Theater In-Wall Series
SPECIFICATIONS
© 2004 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International
Industries, Incorporated.
Part No. 406-000-05033
PRO SOUND
COMES HOME
™
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
516.255.4JBL (4525) www.jbl.com
NOTE:
For new-construction applications, be sure
to purchase the correct rough-in frame kit.
