4
jbl on stage micro easy setup guide
Step 1. Unpack JBL On Stage
Micro, adapters, remote control
and input cable. Read these
instructions completely.
Step 2. Move the battery door to
the unlocked position to open
the battery compartment.
Step 3. Place four AAA batteries
in the battery compartment.
+
-
-
or
Step 5. Place the appropriate iPod
®
adapter onto JBL On Stage Micro.
Place your iPod on the docking connector or connect the audio input
cable to the rear of JBL On Stage Micro. Connect the audio cable to
the audio source.
Step 4. Connect the power adapter
plug into the input marked on the
rear of JBL On Stage Micro and
plug the power adapter into a wall
outlet or power strip.
Step 6. Press the Power button
on the back of JBL On Stage
Micro. A green LED will light
when the JBL On Stage Micro
system is on.
_
Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute the JBL On
Stage Micro. Press either button to
unmute.
+
™*
