Software Upgrade Procedure
1. Put the "Harman_G1.HUI" to the root directory of U disk, and plug the U disk into
USB port of machine.
2. Turn on the machine, make sure it is working.
3. Press and hold the "BT" key and "Vol+" key for 10s until the LED show white.
4. It is updating when the machine front LED show white. If it failed to upgrade, the
front LED will show red. You need to restart from the step 1.
5. The machine front LED will show green after upgrade successfully and restart
automatically.
6. Please press and hold the "BASS BOOST" key and "Vol-" key for 2s,to check the
version number.
Button Pattern
Action
Indicator
& Bluetooth
Long press > 10s
Enter DFU mode in On Mode
& Play
Long press > 10s
Reset to factory default in On Mode.
Volume - & Bluetooth
Long press > 10s
Enter by-pass mode in On Mode.
Volume - & Bass boost
Long press > 2s
Show SW version in On Mode.
Play & Bass boost
Long press > 5s
Enter Demo mode in On Mode.
& Volume -
Short press < 2s
at same time
Mute unit output
In Mute status, press any button of
or Volume- to release mute
Key Combination / Button Function Mapping
Summary of Contents for Party Box 200
