20
UK
m
602,
m
603). The
m
1003 unit with its three additional extensions can even supply aquariums of
up to 1000 l.
The special construction of the spiral channel up which the CO
2
bubbles rise, with ventilation slits
in the sides, ensures complete diffusion of the CO
2
into the surrounding water without the need
for an additional water pump to create a current.
Due to the transparency of the reactor, the bubbles can be clearly observed as they rise, allowing
the optimum amount of CO
2
to be set even without a bubble counter.
8 JBL ProFlora Count Bubble Counter
Bubble counter with integral magnifying glass makes it easier to check amount of CO
2
.
The JBL ProFlora Count bubble counter makes it easy to check the amount of CO
2
whatever
the location. An integral magnifying glass makes observation of the bubbles particularly simple.
Screw fittings on the inlet and outlet ensure safety. Can be fitted to uneven furniture surfaces
using the enclosed screws.
9 The non-return valve JBL ProFlora SafeStop
Special non-return valve for CO
2
.
Non-return valve with washer, “pre-tensioned“ by a spring, preventing water leaking into the
expensive pressure regulator and CO
2
cylinder.
Note: CO
2
has a very powerful diffusion strength which, if a “normal” non-return valve was used,
would draw water from the aquarium through the valve as far as the storage cylinder.
10 The solenoid valve JBL ProFlora
v002
(
u
402,
m
602 only)
Noise-free 12V solenoid valve with electronic power supply, pre-fitted on
m001 and u00
pressure regulator 1.
Top-class solenoid valve which creates no noisy hum thanks to the 12 V direct current power
drive. The power consumption optimised for use with CO
2
systems uses only 0.8 W, saving
electricity and ensuring that the valve is hardly warm to the touch. The electronic universal power
supply unit fits all common mains voltages worldwide.
11 pH-Computer JBL ProFlora pH control
(only
u
403,
m
603,
m
1003)
The latest digital measurement and control technology regulates the pH level and CO
2
supply.
The latest digital measurement and monitoring technology measures the pH value and temperature
and reliably regulates the pH value and supply of CO
2
fully automatically. This ensures luxuriant
plant growth and healthy fish. The JBL ProFlora pH control pH-Computer has an integral solenoid
valve as well as offering a whole range of useful features never before incorporated in equipment
of this class. A simple multi-lingual menu guides you safely through all the functions. The complete
equipment runs on 12 V low voltage, providing the highest possible safety.
(For more details please refer to the instructions for use included separately with this device).
12 Installation
A schematic installation diagram shows the following items. For clarity only the parts which convey
CO
2
are illustrated. The sensors and power supply units are not shown.
1
Refillable 500 g
JBL ProFlora m500
CO
2
cylinder with stand
2
Refillable 2 kg
JBL ProFlora m2000
CO
2
cylinder
3
Disposable 500 g
JBL ProFlora u500
CO
2
cylinder
4
JBL ProFlora m001
pressure regulator fitting (configuration for refillable cylinders)
5
JBL ProFlora u001
pressure regulator fitting (configuration for disposable cylinders)
6
JBL ProFlora v002
pressure regulator fitted with solenoid valve
7
pH computer
JBL ProFlora pH control
8
JBL ProFlora Count
bubble counter
9 Anti-rust
JBL ProFlora SafeStop
non-return valve
Summary of Contents for ProFlora m1003
