User Manual
34
Display Auto-Dim
The display can be set to automatically turn off when unused for a specified amount of time.
This feature can be enabled or disabled on the LCD by turning the encoder to select the
desired setting and then pressing it to apply the setting. The threshold time for auto-dim-
ming can be set using JBL Performance in the Device Control Panel or by setting Display
Auto-Dim Time on the LCD.
Display Auto-Dim Time
If Display Auto-Dim is enabled, this sets the amount of time between the last press of a knob
or button on the LCD and when the display turns off. The Auto-Dim Time can be changed in
real time by turning the encoder. Pressing the
Back
button exits to the main menu.
Ambient Temperature
The Ambient Temperature setting adjusts the equation used to calculate the amount of time
applied when delay is entered as distance to account for the impact of temperature on the
speed of sound, and can be changed in real time by turning the encoder. Pressing the
Back
button exits to the main menu.
Locate
The Locate feature flashes the LEDs on the amplifier module and is bidirectionally used, ei-
ther to identify hardware from software, or to identify an associated virtual device in software
from the physical cabinet. This feature can be set from the LCD or from software. Restarting
the device automatically sets this parameter to OFF. The feature can be enabled or disabled
by using the encoder to select On or Off, and then pressing on it to apply the value.
15.6 INFO
Speaker Model
This screen displays the speaker model.
101
SRX906LA
INFO:SPEAKER MODEL
V
Amplifier Version
This screen displays the hardware revision of the amplifier module.
101
INFO MENU
F
V
101
SETTINGS: LCD A-DIM
Disable
Enable
V
101
SETTINGS: A-DIMETIME
10 min
V
101
SETTINGS: AMB TEMP
20.00 c
V
101
SETTINGS: LOCATE
On
Off
V
Summary of Contents for SRX900 Series
Page 1: ...User Manual ...
Page 51: ......
