9
1.4 Rear Panel Controls & Connectors
(VMA260 & VMA2120)
CH1
CH2
CLASS 2 OUTPUT WIRING PERMITTED
OUTPUTS
REMOTE (CSR-V)
CH1
CH2
100V 70V COM
1-Input 1 to CH2
2-Input 2 to CH2
3-Input 3 to CH2
4-Music 1 to CH2
5-BT/USB to CH2
6-Input 4 to CH1
7-Input 5 to CH1
8-Input 6 to CH1
9-Music 2 to CH1
10-Not Used
1-70V/100V Output
2-Chime
3-Input 1 Line/Mic
4-Input 2 Line/Mic
5-Input 2 Phantom
6-Input 3 Line/Mic
7-Input 3 Phantom
8-Not Used
Signal Routin
g
1-70V/100V Output
2-Chime
3-Input 4 Line/Mic
4-Input 5 Line/Mic
5-Input 5 Phantom
6-Input 6 Line/Mic
7-Input 6 Phantom
8-Not Used
CH1 Setting
s
CH2 Setting
s
OFF
OFF
LINE
LINE
OFF
LINE
OFF
NC
OFF
OFF
LINE
LINE
OFF
LINE
OFF
NC
ON
ON
MIC
MIC
ON
MIC
ON
NC
ON
ON
MIC
MIC
ON
MIC
ON
NC
OFF
ON
CH1 VOX
(Input 2)
CH2 VOX
(Input 5)
MONO
SUM
MONO
SUM
MONO
SUM
MONO
SUM
MUSIC1
MUSIC2
INPUT2
INPUT3
INPUT5
INPUT6
INPUT1
FRONT
PANEL
INPUT4
FRONT
PANEL
PRIORITY
100V ~
120V ~
220V-240V ~
50/60Hz 175W
WARNING
- TO REDUCE
THE RISK OF FIRE OR
ELECTRICAL SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
AVERTISSEMENT
-
RISQUE DE CHOC
ÉLECTRIQUE - NE PAS
OUVRIR.
AVERTISSEMENT
-
ÉNERGIE ÉLECTRIQUE
DANGEREUSE VOIR LA
NOTICE DE
FONCTIONNEMENT.
PRIORITY
MADE IN CHINA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
VMA
260
CONFORMS TO
UL STD .60065
CERTIFIED TO CSA STD.
C22.2 NO .60065
Apparatet må tilkoples jordet stikkontakt
Apparaten skall anslutas till jordat uttag
Laite on liitettävä suojakoskettimilla
varustettuun pistorasiaan
CONTAINS FCC ID: API-MB8811VMA
CONTAINS IC: 6132A-MB8811VMA
CMIIT ID: 2016DJ2940
HARMAN INTERNATIONAL
1718 W. Mishawaka Rd.,
Elkhart, IN 46517
ATTENTION - POUR RÉDUIRE LE
RISQUE DE CHOCK ÉLECTRIQUE, LA
FICHE CENTRALE DE LA PRISE DOIT
ÊTRE BRANCHÉE POUR MAINTENIR
LA MISE À LA TERRE.
CAUTION - TO REDUCE THE RISK OF
ELECTRIC SHOCK, GROUNDING OF
THE CENTER PIN OF THE PLUG MUST
BE MAINTAINED.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING CONDITIONS:
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAN-ICES-3(B)/NMB-3(B)
C
D
F
H
G
E
A
B
I
K
L
J
M
N
Figure 1.4.1 Rear Panel - VMA 260
A. Amplifier output connectors.
B. Remote volume connectors – RJ-45 style connector to connect to JBL CSR-V
control modules.
C. Input 2 – Input audio through either the Euroblock connector or the 1/4” TRS
connector. Pins 4 and 5 of the Euroblock are priority contacts that will duck other
channels during an announcement when the contacts are closed using a switch.
D. Input 3 accepts input through either the 3-pin Euroblock or the Dual RCA jacks.
Stereo, unbalanced sources will be summed into a mono signal.
E. Music1 input uses a Dual RCA Connector. Stereo, unbalanced sources will be
summed together.
F. Input 5 – Input audio through either the Euroblock connector or the 1/4” TRS
connector. Pins 4 and 5 of the Euroblock are priority contacts that will duck other
channels during an announcement when the contacts are closed using a switch.
G. Input 6 accepts input through either the 3-pin Euroblock or the Dual RCA jacks.
Stereo, unbalanced sources will be summed together.
H. Music2 input uses a Dual RCA Connector. Stereo, unbalanced sources will be
summed together.
I. Signal Routing DIP switch is used to route inputs to both output channels. By
default, each group of inputs is routed only to its respective output channel (Input
1 – Music1 are routed to output CH1, Input 4 – Music2 are routed to output CH2).
J. VOX sensitivity adjustment for Input 1.
K. CH1 Settings DIP switch is used to enable the 70V/100V output option, turn on
the chime feature, select input gain, and enable phantom power for CH1.
L. VOX sensitivity adjustment for Input 4.
M. CH2 Settings DIP switch is used to enable the 70V/100V output option, turn on
the chime feature, select input gain, and enable phantom power for CH2.
N. AC Power Inlet – Detachable IEC.
