26
VTX A
8
| Rigging Manual
8.2 - EXTENSION BAR OVERVIEW
The Array Frame Extension Bar is used to connect the Array Frame to the suspension points. One Extension Bar is included with the VTX
A8 AF and additional Extension Bars can be purchased and used depending on the application. The extension is compatible with 5/8”
shackles and three are included. Two Shackles are used for suspension and one for cable relief. Two Quick Release Pins are included
for attaching the Extension Bar to the Array Frame.
TIP:
The VTX A8 AF Extension Bar is
only
compatible with 5/8” shackles. Three 5/8” shackles are included with each Ex-
tension Bar and Array Frame.
CAUTION:
Always use high-quality 5/8” rigging shackles made by reputable manufacturers. Always inspect all rigging
components for potential defects before use.
CABLE STRAIN RELIEF
LOCATION
ARRAY FRAME
ATTACHMENT POINTS
QUICK RELEASE PINS
STORAGE POSITIONS
SHACKLE ATTACHMENT POINTS
