background image

 

 

 

I-Tech 12000HD Parallel Mode Example: 

Using the 

LK VTX-NL-424 

breakout cable, two subwoofer encloses can be connected to a single 2 channel iTech HD 

amplifier. The breakout cable allows each subwoofer to be connected to an independent amplifier channel as illustrat-

ed in the example below. The breakout cable should always be connected to the CH1 (TOP) NL4 connector which con-

tains both Channel 1 and Channel 2. 

NL4 Cable 

LK VTX-NL-424 

I-Tech 4x3500HD Parallel Mode Example: 

To implement parallel mode wiring on IT-4x3500HD amplifiers, a pair of LK VTX-NL-424 adapters can be used in con-

junction with 2 x NL4 cables that are directly connected to the amplifier’s NL4 outputs. Alternatively, a single NL8 cable 

can be used in conjunction with the recommended 3rd party accessory shown below (Link USA LK VTX-NL-844)  . In this 

case the cable is connected to the NL-8 connector which contains all 4 channels. This makes for an easy and convenient 

wiring scheme since a single NL8 cable can be used to independently power 4x VTX subwoofer enclosures and this sig-

nificantly reduces the number of cables needed.     

NL8 Cable 

LK VTX-NL-844 

 

CH1 

 

CH2 

 

CH1 

 

CH2 

 

CH3 

 

CH4 

Crown I-Tech 12000HD 

Crown I-Tech 4x3500HD 

Summary of Contents for VTX Series
















Reviews: